Bosch 2 Manual de instruções original - Página 7

Imprimir página

1. Starting Operation

OBJ_BUCH-412-001.book Page 26 Thursday, April 3, 2008 3:18 PM

26 | English

Machine-specific

Safety Warnings

Industrial Cordless Angle Wrench

Hold power tool by the insulated gripping

surfaces, when performing an operation

where the cutting tool may run into hidden

wiring. Contact with a "live" wire will make

exposed metal parts of the tool "live" and

shock the operator.

Do not drill, fasten or break into existing

walls or other blind areas where electrical

wiring may exist. If this situation is unavoid-

able, disconnect all fuses or circuit breakers

feeding this worksite.

Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held

more secure than by hand.

Before any work on the machine (e.g., main-

tenance, tool change, etc.) as well as during

transport and storage, set the rotational di-

rection switch to the centre position. Unin-

tentional actuation of the On/Off switch can

lead to injuries.

Hold the machine with a firm grip. High re-

action torque can briefly occur while driving

in and loosening screws.

Use only flawless tool bits that are not

worn. Defective tool bits can break, for ex-

ample, and cause injury or damage.

When working with an application tool, pay

attention that the application tool is firmly

seated on the tool holder. When the applica-

tion tool is not firmly connected with the tool

holder, it can come loose again and not be

controlled.

Be careful when long screws are screwed

in. Depending on the type of screw and the

tool bit used, there is a danger of slipping.

Long screws are often difficult to control and

the danger exists that the tool bit may slip off

the fastener head and cause injury.

3 609 929 B34 | (3.4.08)

Pay attention to the direction of rotation

that is set before switching on the power

tool. For example, when a screw is to be

loosened and the direction of rotation is set

so that the screw is tightened, this can lead

to a strong torque reaction of the power tool.

Do not use this tool as a drill. Tools equipped

with shut-off clutches are not designed for

drilling applications. The clutch can shut off

automatically and without warning.

Battery

Avoid unintentional switching on. Ensure

the On/Off switch is in the off position be-

fore inserting battery pack. Carrying the

power tool with your finger on the On/Off

switch or inserting the battery pack into

power tools that have the switch on invites

accidents.

Do not open the battery. Danger of short-

circuiting.

Protect the battery against heat, e.g.,

also against continuous sun irradiation

and fire. There is danger of explosion.

Do not short-circuit the battery. There is

danger of explosion.

Battery leakage may occur under extreme

usage or temperature conditions. When a re-

chargeable battery leaks, avoid contact with

the skin or eyes. The battery liquid is caustic

and could cause chemical burns to tissues. If

liquid comes in contact with skin, wash quick-

ly with soap and water, then with lemon juice

or vinegar. If the liquid contacts your eyes,

flush them with water for a minimum of

10 minutes and seek medical attention.

Bosch Power Tools