Bosch 2 Manual de instruções - Página 15

Imprimir página

1. Installation and Connection

Setting the timer

You can use the timer whether or not the appliance

itself is in use. However, it is not possible to set a

cooking time or end time.

The maximum time that can be set is 23 hours and 59

minutes. Up to 10 minutes, the timer duration can be

set in 30-second increments. Above 10 minutes, the

time increments become longer the higher the value.

The timer duration will start at a different default value,

depending on which button you touch first:

5 minutes if you touch the

you touch the

button.

Touch the

button until the timer symbol

highlighted.

Use the

button to set the timer duration.

After a few seconds, the timer duration will start to

count down.

Tip:

If the set timer duration is the duration for which

you wish to cook your food, use the cooking time. The

appliance will then switch off automatically when it has

finished cooking.

The timer duration has elapsed

An audible signal will sound. The timer duration will be

zero on the display.

Touch any button to switch off the timer.

Changing and cancelling

You can use the

duration at any time. After a few seconds, the change

will be applied.

To cancel, use the

button to reset the timer duration

all the way to zero. The timer is now switched off.

Setting the time

Once the appliance has been connected to the mains

or following a power failure, the clock will flash on the

display. Set the time.

The function selector must be set to the "Off" position.

Use the

button to set the time.

The time will stop flashing.

Confirm by pressing the

The appliance will apply the time you have set.

Changing the time

You can change the time again when you need to, e.g.

from summer to winter time.

To do this, when the appliance is switched off, touch the

button until the time flashes, and use the

button to change the time.

button and 10 minutes if

button to change the timer

button.

AChildproof lock

Y our appliance is equipped with a childproof lock so

C h i l d p r o o f l o c k

that children cannot switch it on accidentally or change

any settings.

Notes

If a hob is connected, it will not be affected by the

■

childproof lock on the oven.

After a power cut, the childproof lock will no longer

■

be active.

Activating and deactivating

To activate the childproof lock, the function selector

must be set to the "Off" position.

Press and hold the

†'""

appears in the display. This activates the

childproof lock.

Note:

If a timer duration

continue to count down. While the childproof lock is

active, the timer duration cannot be changed.

To deactivate the childproof lock, press and hold the

button again for approx. 4 seconds until

goes out on the display.

Childproof lock

button for approx. 4 seconds.

has been set, this will

†'""