Início
Marcas
Bosch
Máquina de lavar roupa
Bosch 6 Series
Manual de instruções de instalação e funcionamento
Página 6

Bosch 6 Series Manual de instruções de instalação e funcionamento - Página 6

Imprimir página

Bosch 6 Series Manual de instruções de instalação e funcionamento

Safety instructions

The mains voltage on your

■

power socket matches the

rated voltage specified on

the appliance (identification

plate). The connected loads

and the required fuse

protection are specified on

the identification plate.

The appliance is only

■

connected to a source of

alternating current via a

nationally recognized and

grounded outlet that has

been correctly installed.

The mains plug and the

■

grounded socket match and

the earthing system has

been correctly installed.

The cross section of the

■

cable is sufficiently large

enough.

The mains plug is accessible

■

at all times.

If using a residual current

■

circuit breaker, only use one

that bears the following

mark: z. The presence of

this mark is the only way to

be sure that it fulfils all the

applicable regulations.

Warning

Risk of electric shock/fire/

material damage/damage to

the appliance!

If the appliance's mains cable is

altered or damaged, this may

result in electric shock, short

circuiting or fire due to

overheating.

The mains cable must not be

kinked, crushed or altered, and

must not come into contact with

any heat sources.

Warning

Risk of fire/material damage/

damage to the appliance!

The use of extension cords or

power strips may result in fire

due to overheating or short

circuiting.

Connect the appliance directly

to an earthed socket that has

been correctly installed. Do not

use extension cords, power

strips or multi-way couplers.

Warning

Risk of injury/material

damage/damage to the

appliance!

The appliance may vibrate or

■

move when in operation,

potentially resulting in injury

or material damage.

Place the appliance on a

clean, even, solid surface

and, using a spirit level to

guide you, level it with the

screw-in feet.

Ri s k of i n j u ry/materi a l damage/damage to the appl i a nce!