Bosch 6 Series Manual de instruções - Página 13

Imprimir página

OTime-setting options

Y our hob has two timer functions:

T i m e - s e t t i n g o p t i o n s

Programming the cooking time

■

Kitchen timer

■

Programming the cooking time

The hotplate automatically switches off after the time

that is set has elapsed.

Setting procedure:

Select the hotplate and the required heat setting.

Touch the

symbol.

the hotplate.

lights up on the timer display.

‹‹

Within the next 10 seconds, set the required cooking

time in the settings range.

After a few seconds, the time begins to elapse.

The same cooking time can be set automatically

Note:

for all hotplates. The set time for each of the hotplates

counts down independently.

You can find information on automatically programming

the cooking time in section ~ "Basic settings"

Changing or cancelling the time

Select the hotplate and then press the

Change the cooking time using the programming zone

or set to

in order to cancel the time.

‹‹

Once the time has elapsed

The hotplate switches off. A warning signal sounds. The

time program function lights up

the display.

When the

symbol is pressed, the indications turn off

and the beeping stops.

Notes

To set a cooking time of under 10 minutes, always

■

touch 0 before you select the required value.

If a cooking time was programmed for several

■

hotplates, the time information for the selected

hotplate is shown in the timer display.

Select the relevant hotplate to call up the remaining

■

cooking time.

You can set a cooking time of up to

■

lights up on the display for

symbol.

for 10 seconds in

‹‹

minutes.

ŠŠ

The kitchen timer

You can use the kitchen timer to set a time of up to 99

minutes.

This functions independently from the hotplates and

from other settings. This function does not automatically

switch off a hotplate.

Setting

Touch the

symbol repeatedly until the

indicator lights up.

‹‹

Set the desired time in the settings area.

After a few seconds, the time begins to elapse.

Changing or deleting the time

Touch the

symbol repeatedly until the

lights up.

Change the time in the settings area or set

to delete the programmed time.

When the time has elapsed

An audible signal sounds.

display and the

indicator lights up. The displays go

out after 10 seconds.

When the

symbol is touched, the displays go out

and the audible signal ceases.

Time-setting options

lights up on the timer display.

indicator

in order

‹‹

appears on the timer

‹‹