Bosch 8 Series Manual do utilizador e instruções de instalação - Página 11

Imprimir página

Bosch 8 Series Manual do utilizador e instruções de instalação

6.3 Other accessories

You can purchase other accessories from our after-

sales service, specialist retailers or online.

You will find a comprehensive range of products for

your appliance in our brochures and online:

www.bosch-home.com

7 Before using for the first time

Configure the settings for initial start-up. Clean the ap-

pliance and accessories.

7.1 Initial configuration

When the appliance is connected to the electricity sup-

ply for the first time or following a lengthy power cut,

you need to configure the settings before you can use

it. It may take a few seconds for the settings to appear

in the display.

Press the text field for the required setting.

Possible settings:

– Language

– Clock

Turn the control ring to change the setting as re-

quired.

Finally, press "Complete the settings" to confirm.

a A note appears in the display confirming that the ini-

tial configuration is complete.

a The time that is set appears on the display.

To check the appliance before heating for the first

time, open and close the appliance door once.

8 Basic operation

8.1 Switching on the appliance

Press

⁠ to switch the appliance on.

▶

a The Bosch logo appears in the display. The types of

heating then appear.

8.2 Switching off the appliance

Switch your appliance off when you are not using it.

The appliance will switch itself off automatically if it is

not used for a certain period of time.

Press

⁠ to switch the appliance off.

▶

a The appliance switches off. Any functions currently

in progress are cancelled.

a The time or residual heat indicator appears in the

display.

Before using for the first time en

Accessories vary from one appliance to another. When

purchasing accessories, always quote the exact

product number (E no.) of your appliance.

You can find out which accessories are available for

your appliance in our online shop or from our after-

sales service.

7.2 Cleaning the appliance before using it

for the first time

Clean the cooking compartment and accessories be-

fore using the appliance to prepare food for the first

time.

Remove the product information and the accessor-

ies from the cooking compartment. Remove any

leftover packaging, such as polystyrene pellets, and

the adhesive tape that is in or on the appliance.

Wipe the smooth surfaces in the cooking compart-

ment with a soft, damp cloth.

Press

⁠ to switch the appliance on.

Apply the following settings:

Type of heating

Temperature

Cooking time

→ "Basic operation", Page 11

Press ⁠ to start.

Keep the kitchen ventilated while the appliance is

‒

heating.

a Once the time has elapsed, an audible signal

sounds and the display shows the time as zero.

Press

⁠ to switch the appliance off.

Once the appliance has cooled down, clean the

smooth surfaces in the cooking compartment with

soapy water and a dish cloth.

Clean the accessories thoroughly using soapy water

and a dish cloth or soft brush.

8.3 Starting operation

You must start each operation.

Press ⁠ to start.

▶

a The settings, the running time, the display ring and

the heating line appear in the display.

8.4 Pausing or cancelling operation

You can briefly pause operation and then continue. If

you cancel operation completely, the settings will be re-

set.

To pause operation briefly:

Briefly press ⁠ .

‒

To continue operation, press ⁠ .

‒

To cancel operation completely, press and hold ⁠

for approx. 3 seconds.

a Operation will stop and all the settings will be reset.

4D hot air

⁠

Maximum

1 hour