Bosch FAP-OC 500Series Informações sobre o produto - Página 27

Product Information 500 Series LSN Fire Detectors (EU)

D If the cable is surface−feeded, remove the pre−punched cable entries (X) of the

housing. Through the entry (D) beneath the connection board, the cable can be

feeded flush−mounted.

D To fit the cover on the base plate, place the two slots of the cover on the holding pins.

Slightly press the cover onto the base plate until the snap−fit hook locks into place.

Terminal assignment

The FAA−420−RI remote indicator is connected via two ter-

minals.

Terminal

−

Technical specifications for FAA−420−RI

Display medium

Operating voltage

Max. current consumption

Permissible wire gauge

Weight

Product ID

* Non−observance may cause malfunction and damage the LED.

In case of BOSCH detectors, limitation occurs via internal resistor.

Assignment

Conventional technology / LSN −

Conventional technology / LSN +

Page 27

18.

2 LEDs

5 V DC . . . 30 V DC

Limit to maximum 20 mA

0.6 mm − 2.0 mm

45 g

F.01U.522.590

PI − 34.70 en

BDL−F.01U.025.876

A5.en/ 02.02.2006

ST−FIR/PRM1 / zab