Bosch Programme Table Manual de instruções - Página 4

Imprimir página

Bosch Programme Table Manual de instruções

Before washing for the first time

Wash once without any laundry

Sorting and loading laundry

Follow the manufacturer's care information.

According to the information on the care labels.

According to type, colour, soiling and temperature.

Do not exceed the maximum load

Observe the important information

Insert large and small items of laundry.

Close the washing machine door. Take care not to trap items of laundry

between the washing machine door and the rubber seal.

Add detergent and care products

Amount of laundry, soiling, water hardness (ask your water supply

company) and manufacturer's instructions.

our liquid detergent into the appropriate dispenser and place in the drum.

Dilute viscous fabric softener and fabric conditioner with water.

This prevents blockages.

Setting** and adjusting programmes

**If the

display panel, the childproof lock

Programme selector

is active

Additional functions, the options

button and spin speeds

Individual settings, page 5.

All buttons are sensitive and need

only to be touched lightly. Press

and hold the options and spin

speed buttons to run through the

setting options automatically.

displays:

ng, rinsing, spinning

page 9.

page 7.

page 6.

Measure accordingly:

symbol flashes in the

deactivate, page 5.

Start/Reload

Programme selector for

switching the machine on

and off and for selecting

the programme. Can be

turned in either direction.

Washing

Detergent drawer with

compartments I, II,

Drum

Control panel

Washing machine

door

Service flap

Washing

Removing the washing

Open the washing machine door and remove the washing.

If Rinse Hold (without final spin) is active: Turn the

programme selector to

Drain or select the spin speed.

Press

Start/Reload.

– Remove any foreign objects - risk of rusting.

– Leave the washing machine door and detergent

drawer open so that any residual water can

evaporate.

Turning the tap off

Not required for Aqua-Stop models

instructions.

Switching off

Turn the programme selector to Off.

End of programme when ...

...

Start/Reload flashes and -0- appears on the display

panel.

Interrupting the programme

Programmes at high temperatures:

– Cool washing: Select

Rinse/

– Press

Start/Reload.

Programmes at lower temperatures:

–

Rinse/

Spin (deactivate

select

Drain.

– Press

Start/Reload.

Changing the programme, if ...

... you have selected the wrong programme by mistake:

– Reselect the programme.

– Press

Start/Reload. The new programme starts from

the beginning.

Reloading laundry, if ...

...

Start/Reload selected and then YES is lit in the

display panel. If NO is lit, the washing machine door

cannot be opened.

– Press

Start/Reload.

Refer to installation

Spin .

Aqua Plus button) or

page 5