Início
Marcas
Bosch
Máquina de lavar roupa
Bosch Programme Table
Manual de instruções de instalação e funcionamento
Página 13

Bosch Programme Table Manual de instruções de instalação e funcionamento - Página 13

Imprimir página

Bosch Programme Table Manual de instruções de instalação e funcionamento

Washing and drying options

Temperature °C button

Spin speed button B

Rinse hold

Unbalanced load detection

system

option button

set button

Options (symbols on the display panel)

Pre-wash

Intensive

Easy-iron

Water Plus

R Flexi Time

Signal

0 Finished in button

The temperature can be adjusted individually for each programme.

To adjust it, press the °C (Temperature) button repeatedly until the

required temperature is displayed.

The spin speed can be individually adjusted for each programme.

To set the spin speed, press the B (Spin) button repeatedly until the

required spin speed is displayed.

$ (Rinse hold) deactivates the spin function. The laundry remains in the

rinsing water.

The automatic unbalanced load detection system ensures that the laundry

is evenly distributed using several initial spins. If the laundry is extremely

unevenly distributed, the speed of the final spin is reduced or the spin

cycle is not performed for safety reasons.

The set programmes can be individually adjusted.

To choose the required option:

Press the option button repeatedly until the required option is selected

(indicator lamp flashes).

Press the set button to switch the option on/off (indicator lamp lights

up/does not light up).

If you press and hold the option ~ button, all the options scroll through.

Prewash at 35 °C. Suitable for heavily soiled laundry.

Prolonged washing time. Suitable for particularly heavily soiled laundry

with dried-on stains. Cannot be combined with R Flexi Time

Special spin sequence with subsequent fluffing. Gentle final spin at

reduced speed. Slightly increased residual moisture in the laundry.

Reduces creasing and laundry is easier to iron.

Increased water level and additional rinse cycle. For regions with very soft

water or for further improving the rinsing result. Any detergent residues

are removed.

Sets the washing time. normal-medium-short.

Activates or deactivates the audible signal.

You can postpone Programme start before it begins. Using the Remaining

time, you can determine when the selected programme is to end. The

remaining time can be set in one-hour increments, up to a maximum of

24 hours. Press the 0 (Finished in) button repeatedly until the required

number of hours is displayed.

Then press the A (Start/Pause) button, the programme will start after a

delay according to the set (Remaining time). The required time to the end

of the programme is shown on the display panel.