Bosch Programme Table Manual de instruções - Página 9

Imprimir página

Bosch Programme Table Manual de instruções

What to do if...

If you cannot rectify a fault yourself (e.g. switching off/on) , please contact our after-sales

service. We will always find an appropriate solution and will avoid unnecessary visits by

engineers. Trust the expertise of the manufacturer and rest assured that the repair will be

carried out by trained service technicians using original spare parts. The contact details of your

local after-sales service can be found in the enclosed after-sales service directory, or by calling

one of these numbers:

– GB 0844 892 8979 (Calls from a BT landline will be charged at up to 3 pence per minute.

A call set-up fee of up to 6 pence may apply.)

– IE 01450 2655

When contacting the after-sales service, please quote the appliance's product number (E no.)

and production number (FD) (see under the loading door).

Turn the programme selector to Off and unplug the mains plug from the socket.

The

Start/Stop indicator lamp

Mains plug plugged in?

does not light up.

Programme selected?

Check the socket fuse.

The display panel light and

Energy-saving mode is activated

Energy-saving mode instructions.

indicator lights (depending on

model) go out and the

Start/Stop indicator light

flashes.

The Container indicator lamp

Empty the condensation container

and the

Start/Stop button are

Clean the condensation container filter if necessary

flashing.

Dryer transported?

The Clean indicator lamp and

Rinse the fluff filter under running water

Start/Stop button are flashing.

Dryer does not start.

Programme set? Ambient temperature greater than 5 °C?

Water is leaking out.

Make sure the dryer is level.

The door opens by itself.

Push the door closed until you hear it click into place.

Creasing.

Laundry load exceeded?

Remove articles of clothing immediately after the end of the

programme, hang up and pull into shape.

Unsuitable programme selected

Drying result is not satisfactory

Warm laundry feels damper than it actually is.

(laundry feels too damp).

The selected programme does not suit the load.

Use another drying programme or, in addition, select the

time programme

Use fine adjustment for the drying result

Fine layer of limescale on the humidity sensors

Programme termination, e.g. tank full, mains power supply

failure, door open or maximum drying time reached.

Drying time too long.

Rinse the fluff filters under running water

Insufficient supply of air

Air inlet possibly blocked

Ambient temperature higher than 35 °C

room.

The humidity in the room

Make sure the room is sufficiently ventilated.

increases significantly.

Power failure.

Remove laundry from the dryer immediately and spread out.

This allows the heat to dissipate.

Other intermittent noises and

Not an error.

vibrations.

Normal noises

Loud humming noise for several

Has the condensation container been properly inserted?

seconds.

Not an error. Normal noises

see the separate

page 4.

page 9.

Wait 2 hours and start again.

page 4.

Start/Stop button selected? Door closed?

page 7.

page1/2 and 6.

Clean the humidity sensors

page 9.

ensure that air can circulate.

Clear inlet

page 11.

Push the condensation container all the way in.

page 11.

Safety instructions

Emergency

ONLY use the

dryer...

The dryer must

NEVER...

Hazards

Installation

Mains

connection

Operation

Defect

page 4.

page 8.

ventilate the

Spare parts

Disposal

– Pull the appliance plug out of the socket immediately or disconnect the fuse.

– in rooms inside the house.

– to dry fabrics.

– be used for purposes other than those described above.

– be modified in terms of its technology or properties.

– The dryer must not be used by children or persons who have not been

instructed in its use.

– Do not leave children unsupervised near the dryer.

– Keep pets away from the dryer.

– Remove all objects from pockets, and lighters in particular

explosion.

– Do not lean or sit on the door

Risk of tipping.

– Secure loose cables

Risk of tripping.

– Do not operate a dryer if there is a risk of frost.

– Connect the dryer to an AC earthed socket according to specifications,

otherwise it cannot be guaranteed that the appliance is completely safe.

– The cable cross-section must be sufficient.

– Only use earth-leakage circuit breakers with the following symbol:

– The appliance plug and socket must be compatible.

– Do not use multiple plugs/connectors and/or extension cables.

– Do not touch or hold the appliance plug with wet hands

Risk of electric shock.

– Never pull the appliance plug out of the socket by its cable.

– Do not damage the mains lead

Risk of electric shock.

– Only load the drum with laundry.

Check the contents before you switch the dryer on.

– Do not use the dryer if the laundry has been in contact with solvents, oil, wax,

grease or paint (e.g. hair styling products, nail varnish remover, stain

remover, cleaning solvent, etc.)

Risk of fire/explosion.

– Dust (e.g. coal dust, flour) poses a danger: Do not use the dryer

Risk of explosion

– Do not put laundry containing foamed material/rubber in the dryer

material may be destroyed and the dryer be damaged due to possible

deformation of the foamed material.

– When cleaning the fluff filter, make sure that no foreign material (down or

filling material) gets into the air duct opening. If necessary, clean the drum

beforehand with a vacuum cleaner. If foreign material should still get into the

air duct

call the after-sales service

– Switch off the dryer once the programme has ended.

– The water from condensation is not drinking water and may be contaminated

with fluff.

– Do not use the dryer if it is defective or if you suspect that it is.

Repairs must only be carried out by the after-sales service.

– Do not use the dryer if the mains cable is defective. To avoid danger, only

have the defective mains cable replaced by the after-sales service.

– Always pull the mains plug out of the socket before changing the bulb for

the interior light

Risk of electric shock.

– Only use genuine spare parts and accessories for safety reasons.

– Pull out the appliance plug, then cut off the mains cable from the appliance.

Dispose of at a municipal waste disposal facility.

– Heat exchangers contain a fluorinated greenhouse gas covered by the

Kyoto protocol (R134a)

dispose of in a proper manner.

Capacity: 0.22 kg.

– Packaging: Keep all packaging out of reach of babies and children

Risk of suffocation.

– All materials are environmentally sound and can be reused.

Dispose of in an environmentally-responsible manner.

Risk of

elastic

Risk of fire/explosion.