Draper Nocturne+ E Instruções de instalação e operação - Página 9
Procurar online ou descarregar pdf Instruções de instalação e operação para Ecrã de projeção Draper Nocturne+ E. Draper Nocturne+ E 12 páginas. Outdoor electric projection screen
Imprimir página
Nocturne+ E
Section 7 - Electrical Connections
1. Screen operates on 110-120V, 60 hz., 1.1 Amp current draw.
2. If optional low-voltage control is specified, please refer to wiring diagrams
3. Screen is shipped with internal wiring complete and control switch
furnished by installer. Connections should be made in accordance with attached wiring diagram, and wiring should comply with national and local electrical codes.
4. All operating switches should be "off" before power is connected.
Section 8 - Wiring Diagrams
Please Note: Do not wire motors in parallel.
STANDARD
Wiring Diagram
120VAC Motors
120V
MOTOR
W BK R
G
110-120V Line
INTERNAL SCREEN WIRING
White (Common)
Red (Up)
Black (Down)
Green/Yellow
(Motor Ground)
To
110-120 VAC
L1
Line
N
GND
NOTE: Test screen operation
If screen direction does not
correspond with the switch
orientation, turn power back off
and switch the RED and BLACK
wires from the motor to the
control switch.
Do not wire motors in parallel without
written permission from Draper.
Control
Switch
Single Gang
Box (by others)
BL
R
BK
Dashed Wiring
by Electrician
Sonesse
®
is a registered trademark of Somfy
External LVC-IV - Single or Multiple Projection Screen Wiring Diagram
Red-to screen (directional)
Brown-to screen (directional)
Yellow-to 110V-120V AC-Hot
Black-to 110V-120V AC-Hot
White-Common to screen & 110V-120V AC Neutral
Green/Yellow (Ground)
Location of key
operated on-off
switch if furnished.
Dashed wiring by electrician
Low-voltage wiring by others
Factory wiring
.
(Section 8)
fully boxed. Wire to connect screen to switch
(es)
110-120V Motor
®
Systems, Inc.
and switch
to power supply should be
(es)
(es)
OPTIONAL
Wiring Diagram
120VAC RTS Motors
RTS
MOTOR
120V
RF Remote
B W G
Wireless Keypad
110-120V Line
Decora wireless keypad is optional.
Remote comes standard with RTS motor.
Receiver
3 Button Wall Switch
Button
DOWN - Black
COM - White
UP - Red
Electrically Straight
Data Cable to more
LVC-IV modules.*
RS232/485
Inputs/Outputs
IR Eye Input
Low-Voltage
Trigger
4-28 VDC
page 9 of 12
Telis 1
STOP
Deco Flex
Dashed Wiring
by Electrician
Wall Switch