Targa and Premier—Large Sizes by Draper
Types of Installation (Targa Dowel Shown)
Ceiling Mounted
Wall Mounted
Appropriate hardware
provided by installer.
Product is very heavy: Installer must provide adequate
attachment hardware and anchors as required. Installer
must also insure that wall or ceiling structure is of
adequate strength.
Tab-Tension Adjustment
Procedure for Premier
➀ Determine which side requires adjustment.
➁ Secure dowel with one hand.
Caution: Do not touch or bend surface.
➂ Using Philips-head screwdriver,
depress spring-loaded
adjustment screw (see drawing)
and slowly turn clockwise
Dowel
to tighten tension, or
counterclockwise to loosen
tension. The screw adjusts
in ¼ turn increments.
Adjust only one increment (¼ turn).
➃ If problem is not corrected, leave screen in position
for 24 hours to allow surface material to stretch into position.
➄ If problem still is not corrected, repeat steps 2 and 3.
Two-Way Serial Communication
(RS232) with MC1
Case Dimensions (Premier Tab Tension Surface Shown)
6¾"
6¾"
Appropriate
3
3
/
"
8
hardware
provided
by installer.
3
R2
3
/
"
8
Dim Targa
7
A
8
/
8
B
3"
Single Station Control
Tensioning
Cable
Adjustment
Screw
Red
Blue
Location of key
operated on-off
switch if furnished
To 110-120V Line
See separate Serial Communication-
RS232 Instruction sheet for enabling
RS232 with the MC1.
www.draperinc.com
3
/
"
8
7
/
"
8
¼"
11
/
"
16
B
Premier
"
Varies
Varies
Wiring Diagrams
Internal Screen Wiring
White (Common)
Black (Down)
Red (Up)
Green (Ground)
Chassis Ground Screw
Control
Single gang box by others
switch
Min. 4" x 2
1
/
" x 1
7
/
" deep
8
8
Black
Dashed wiring
by electrician
To 110-120V Line
Low Voltage & Wireless Control
White-Common to screen & 110-120V AC Neutral
Red-to screen (directional)
Brown-to screen (directional)
Yellow-to 110-120V AC-Hot
Black-to 110-120V AC-Hot
Green-Ground
Dashed wiring by electrician
Low voltage wiring by others
Eye Port for IR Eye, RF Receiver or LED
Wall Switch. For more than one of
these, a splitter is required.
3 Button Wall Switch
DOWN - Black
COM - White
UP - Red
Aux Port for connecting additional LVC-III
modules (up to six total can be linked-
connect from Aux to Eye).
(765) 987-7999
Page 2 of 2
Surface Width + A
Multiple Station Control
Internal Screen Wiring
White (Common)
Black (Down)
Red (Up)
Green (Ground)
Chassis Ground Screw
Cap off with wire
nut and tape
Red
Blue
Black
Dashed wiring
by electrician
Red
Blue
Black
Red
Blue
Single gang box by others
Black
Min. 4" x 2
1
/
8
3 shown. More or less equally
feasible.
Location of key
operated on-off
switch if furnished
Internal Screen Wiring
STOP
STOP
Control
Switches
24v DC
" x 1
7
/
" deep.
8
White (Common)
Red (Up)
Black (Down)
Green (Ground)
Chassis
Ground Screw
To
110-120V
Line
Location of key
operated on-off
switch if furnished
Imprimir página