Bosch WAE28262GB Manual de instruções e instruções de instalação - Página 30
Procurar online ou descarregar pdf Manual de instruções e instruções de instalação para Máquina de lavar roupa Bosch WAE28262GB. Bosch WAE28262GB 36 páginas.
![Bosch WAE28262GB Manual de instruções e instruções de instalação](/uploads/products/server2/1364528/1364528.jpg)
Positioning and connecting
en
When the tap is open, the water flow
■
rate is at least 8 l/min.
If the water pressure is higher than
■
this, a pressure-reducing valve must
be installed.
Connection
Connect the water supply hose to the
tap (¾" = 26.4 mm) and to the
appliance (not necessary for AquaStop
models as this is permanently installed):
Standard model
■
AquaSecure model
■
AquaStop model
■
Carefully turn the tap on, and check that
the connection points are not leaking.
The screw connection is under
Note:
mains water pressure.
30
Water outlet
Caution!
Water damage
If the drain hose slips out of the
washbasin or the connection point
during draining due to high water
pressure, any escaping water may
cause water damage.
Secure the drain hose so that it cannot
slip out.
Notes
Do not kink the water drain hose or
■
stretch it lengthways.
Height difference between the
■
installation surface and the drain:
Min. 60 cm, max. 100 cm
You can lay the water outlet hose as
follows:
Drainage into a washbasin
■
:
Warning
Risk of scalding!
When washing at high temperatures,
there is a risk of scalding if you
come into contact with hot detergent
solution (e.g. when draining hot
detergent solution into a wash
basin).
Do not reach into the hot detergent
solution.
Caution!
Damage to the appliance/fabrics
If the end of the drain hose is
immersed in the drained water, water
may be sucked back into the
appliance and may damage the
appliance/fabrics.
Make sure that:
– The plug does not block drainage
from the wash basin.
– The end of the drain hose is not
immersed in the drained water.
– The water drains away quickly
enough.