Bosch WAJ Series Manual de instruções e instruções de instalação - Página 9
Procurar online ou descarregar pdf Manual de instruções e instruções de instalação para Máquina de lavar roupa Bosch WAJ Series. Bosch WAJ Series 40 páginas.
Imprimir página
( Mains cable
0 Bag:
Installation and operating
■
instructions
After-sales service location
■
directory*
Warranty*
■
Supplementary sheet for the
■
installation and operating
instructions*
Cover caps for openings left
■
after removing the transport
locks
Wrench*
■
8 Water drain hose
@ Elbow for securing the water drain
hose*
H Water supply hose on standard/
Aqua-Secure models
P Water filter*
*depending on the model
In addition, a hose clamp (24 - 40 mm
diameter, available from specialist
dealers) is required to connect the
water drain hose to a siphon.
Useful tools
Spirit level for levelling
■
Wrench with:
■
– WAF 13 for loosening the
transport locks, and
– WAF 17 for aligning the
appliance feet
Safety instructions
:
Warning
Risk of injury!
The washing machine is very heavy.
■
Be careful when lifting/transporting
the washing machine.
When the washing machine is lifted
■
by its protruding parts (e.g. the
washing machine door), the
components may break off and
cause injuries.
Do not lift the washing machine by
protruding parts.
Positioning and connecting
If the hose and mains cables are not
■
routed properly, there is a risk of
tripping and injury.
Lay hoses and cables in such a way
that there is no risk of tripping.
Caution!
Damage to the appliance
Frozen hoses may rip/burst.
Do not install the washing machine in
areas exposed to frost or outdoors.
Caution!
Water damage
The connection points for the water
supply hose and water drain hose are
under high water pressure. To prevent
leaks and water damage, you must
follow the instructions in this section.
Notes
In addition to the safety information
■
listed here, the local water and
electricity supplier may have special
requirements.
If in doubt, have the appliance
■
connected by a specialist.
Installation surface
The washing machine must be
Note:
aligned in a stable manner so that it
does not move around.
The installation surface must be firm
■
and level.
Soft floors/floor coverings are not
■
suitable.
en
9