Draper 58329 Manual do utilizador - Página 7
Procurar online ou descarregar pdf Manual do utilizador para Ferramenta eléctrica Draper 58329. Draper 58329 16 páginas.
Imprimir página
5.
HEALTH AND SAFETY INFORMATION
– Do not let familiarity gained from frequent use of tools allow you to become complacent and
ignore tool safety principles. A careless action can cause severe injury within a fraction of a
second.
Power tool use and care
– Do not force the power tool. Use the correct power tool for your application. The correct power
tool will do the job better and safer at the rate for which it was designed.
– Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and must be repaired.
– Disconnect the plug from the power source and/or remove the battery pack, if detachable, from
the power tool before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
– Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool. Power tools are dangerous in the
hands of untrained users.
– Maintain power tools and accessories. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool's operation. If
damaged, have the power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
– Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
– Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking
into account the working conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous situation.
– Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles
and grasping surfaces do not allow for safe handling and control of the tool in unexpected
situations.
Service
– Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
5.2 SPECIFIC SAFETY INSTRUCTIONS FOR HEAT GUNS
Warning! Danger of explosion!
– This hot air gun can explosively ignite combustible fluids and gases.
– Do not work in a potentially explosive environment. Check the surrounding before starting to
work.
– Do not work on fuels or gas containers or in their vicinity, even when they are empty.
Warning! Danger of fire!
– Heat can ignite combustible materials including those that are hidden behind coverings, in
ceilings, floors or cavities.
– Inspect the work area before starting work and in case of doubt, abstain from using the hot air
tool.
– Do not point the unit at the same spot for extended periods.
- 7 -