Draper 03289 Manual de instruções - Página 10

Procurar online ou descarregar pdf Manual de instruções para Perfurar Draper 03289. Draper 03289 16 páginas. 18v cordless rotary drill

OPERATION AND USE

- SCREWDRIVER BIT HOLDER (Fig.7):

The drill comes equipped with a bit holder (D) on the

left side of the housing to hold the two screwdriver

bits supplied.

- LED WORKLIGHT (Fig.8):

To aid drilling and screwdriving in confined,

inadequately lit spaces, the LED worklight

automatically illuminates when the trigger is

activated.

- HOLDING THE DRILL (Figs.9 & 10):

The drill casing is designed to be held comfortably in

two ways;

1. By the handle.

2. Or by the in-line support grip.

- DUST AND SWARF:

A correctly fitted dusk mask, suitable for the activity

and in accordance to the relevant standard, must be

worn.

For work activities involving exposure to fine wood

dust, a mask rated to at least FFP2 should be used.

Swarf produced by metal drilling is extremely sharp.

Take precautions when clearing swarf. The burr left on

the hole is also sharp and should be removed with a

suitable tool.

- DRILLING WOOD AND PLASTIC:

To prevent splitting around the drill holes on the

reverse side, place a piece of scrap timber under the

material to be drilled.

- DRILLING METAL:

Metals such as sheet steel, aluminium and brass may

be drilled. Mark the point to be drilled with a centre

punch to help the drill bit tip to locate. A drop of oil

on the area will aid cutting and help the life of the bit.

- SCREWDRIVING:

To prevent slip or damage to the screwhead, match

the screwdriver bit to the screwhead size. To remove

screws, move the direction switch to the reversing

position and apply pressure to the screwhead and

depress the trigger slowly.

FIG.7

FIG.8

FIG.9

FIG.10

- 9 -

(D)