Draper StormForce PT241SF Instruções para - Página 13
Procurar online ou descarregar pdf Instruções para para Perfurar Draper StormForce PT241SF. Draper StormForce PT241SF 16 páginas. 110w 230v 240mm polisher
Também para Draper StormForce PT241SF: Manual de instruções (16 páginas)
Imprimir página
10. MAINTENANCE
10.1 GEARBOX MAINTENANCE FIG. 6
NOTE: Remove the plug from the socket before carrying out
adjustment, servicing or maintenance.
Before each use remove the gearbox access cover
ensure there is sufficient grease. Using pin spanner
remove the access cover
top-up the gearbox (20 grams max.) using a general purpose
lithium based grease.
WARNING: Assembly must be completed prior to operating
the machine.
The hammer drill does not require any special maintenance.
Regularly clean/vacuum the ventilation slots. Use only a mild
cleaner and a damp cloth to clean the tool.
11. TROUBLESHOOTING
NOTE: Remove the plug from the socket before carrying out adjustment, servicing or
maintenance.
PROBLEM
Motor does not start.
12. OPTIONAL ACCESSORIES
For a full range of optional accessories, please refer to your local Draper Stockist.
anti-clockwise. If required
POSSIBLE CAUSE
1. Fuse.
2. Brushes worn.
3. Unsure.
FIG.6
to
REMEDY
1. Replace/reset 13 amp time
delay fuse or circuit
breaker.
2. Have carbon brushes
replaced in motor.
3. Return to an authorised
service agent for diagnosis.
13