Draper 30736 Manual de instruções - Página 8
Procurar online ou descarregar pdf Manual de instruções para Serra Draper 30736. Draper 30736 16 páginas. Horizontal and vertical metal cutting bandsaw
Imprimir página
4. BELT ADJUSTMENT (Fig.5)
Before any operation involving the belts
can be carried out make sure the power
supply is disconnected. The bolt ✴✌
must be turned anti-clockwise to give
enough movement on the motor so that
the belt can be fitted/adjusted.
* Note: The gearbox oil should be
checked annually. Remove the 4 screws
and plate to gain access to the gearbox.
If it requires topping up use GP80
gearbox oil.
5. BLADE SPEEDS (Fig.6.)
Refer to the material cutting chart (on
page 8) to decide the speed relevant to
the material to be cut. Select the
belt/pulley combination. When set,
tighten the motor tension using bolt ✴✌.
6. NO-VOLT ON/OFF SWITCH (Fig.7)
The saw is fitted with a no volt type
on/off switch. The head is fitted with a
safety catch ✵✌ that when properly
adjusted will automatically switch the
machine off after each cut.
OPERATION & USE
✴✌
✍✌
FIG.5.
FIG.6.
FIG.7.
✵✌
- 7 -