Draper 400BLA Manual de instruções - Página 7

Procurar online ou descarregar pdf Manual de instruções para Compressor de ar Draper 400BLA. Draper 400BLA 12 páginas. 150 litre compressor

OPERATION

1. Connect the compressor to the power supply.

Always turn the machine on and off by means of

the appropriate switch (B) Fig.4 located on top

of the pressure switch box.

2. Check that the reservoir drain valve is closed

3. This compressor is controlled by a pressure

switch assembly (D) Fig.6 which automatically

cuts off the power supply to the motor when the

maximum operating pressure is reached and

restarts the compressor when the compressor

drops below the pre-set minimum.

4. To start the compressor turn the switch to the

ON position as shown in Fig.7.

The pressure switch is pre-set at the factory and

the compressor is also fitted with an overload

safety relief valve in the event of the pressure

switch not function correctly.

5. To stop the compressor turn the pressure switch

to the OFF position. Do not switch off at the

power supply before switching off at the

machine. See Fig.8.

(C)

Fig.5.

Fig.6.

Fig.7.

Fig.8.

- 7 -

(B)

Fig.4.

(D)