Draper 63130 Manual de instruções - Página 8

Procurar online ou descarregar pdf Manual de instruções para Moedor Draper 63130. Draper 63130 12 páginas.

SWITCH

To turn the machine on, press the switch ✴✌ forward until it

locks on. (Fig.4).

To release the lock, push the back half of the switch down,

until it springs backwards, switching off the grinder.

ROUGHING

When performing roughing operations, it is advised to

maintain the disc tilted at an angle of approximately 30° in

relation to the work surface. (Fig.5).

NOTE: Only use grinding discs for this operation.

IMPORTANT

Excessive pressure on the machine does not necessarily

result in higher working speed, on the contrary, it

increases the wear on the disc and can damage the

grinder.

CUTTING

When cutting do not incline the grinder and do not jam the

grinder on the work surface. The cutting edge of the disc

must be in perfect condition (Fig.6). (For hard stone a

diamond-tipped grinding wheel is recommended.)

SIDE HANDLE

For reasons of safety, when working with this type of

electric power tool, the operator must always use the side

handle.

In order to fit the side handle on the grinder, insert it into

one of the threaded seats in the aluminium head and screw

in clockwise until fully tightened.

IMPROPER USE

The functions and use of this tool are those exclusively

indicated in this manual.

OPERATION AND USE

Fig.4.

Fig.5.

Fig.6.

Fig.7.

- 7 -

✴✌