Draper Stormforce 65130 Manual - Página 8

Procurar online ou descarregar pdf Manual para Moedor Draper Stormforce 65130. Draper Stormforce 65130 20 páginas. Air die grinder

HEALTH AND SAFETY INFORMATION

− Personal protective safety glasses shall be worn. Gloves and protective clothing

are recommended.

− Assess the need for personal protection and the provision for dust collection appropriate for the

material to be worked on.

− Die grinders are not insulated for coming into contact with electric power sources.

− Die grinders shall not be used in explosive atmospheres unless specially designed for that

purpose. This product is not designed for that type of atmosphere.

5.3

SAFETY RECOMMENDATIONS FOR THE CORRECT USE OF

ABRASIVE PRODUCTS

− General. Bonded abrasive products are breakable and shall therefore be handled with utmost

care. The use of damaged or improperly mounted or used abrasive products is dangerous and

can cause serious injuries.

− Delivery, handling and storage. Abrasive products shall be handled and transported with care.

Abrasive products shall be stored in such a manner that they are not subjected to mechanical

damaged and harmful environmental influences.

− Selection of the abrasive product. Information on the label or the abrasive product as well as

restrictions of use, safety indications or any other instructions shall be followed. In case of

doubt concerning the selection of abrasive products, the user shall request information from

the manufacturer or supplier.

− Visual inspection and ring test. Abrasive products shall be subjected to a visual inspection as

received before mounting. In addition, a ring test shall be executed for vitrified wheels with

D>80mm. Damaged abrasive products shall be destroyed.

− Mounting before starting and information for grinding. The mounting of abrasive products shall

be carried out according to the instructions provided by both the wheel and the machine

manufacturer. Mounting of abrasive products shall be carried out by a qualified trained person.

Each time after mounting, the wheel shall be test run for a reasonable time – the specified

maximum operating speed of the wheel shall not be exceeded.

− Further information. The following instructions shall be observed, supplementary to the

information contained in the instruction for use of the grinding machine:

− Observance of the user's information from the grinding machine manufacturer.

− Safety devices shall be mounting to the machine and shall be secured.

− No grinding operations without protection by safety devices.

− Use of personal protective equipment according to the type of machine and type of

application, e.g. eye and face protection, ear protection, respiratory protective devices,

protective footwear, protective gloves and other protective clothing.

− Only grinding operations for which the abrasive product is suitable shall be carried out

(taking into account restrictions of use, safety indications or other information).

− Jamming of the hand-held grinding machine shall be prevented. In the case of cutting-off

with hand-held grinding machines, the abrasive product shall be placed in the cutting gap in

a straight position.

− Before placing the hand-held grinding machine on the workbench or on the floor it shall be

turned off and it shall be ensured that the abrasive product has stopped.

– 8 –