Drawell DW-FD Sereries Manual do utilizador - Página 14
Procurar online ou descarregar pdf Manual do utilizador para Equipamento de laboratório Drawell DW-FD Sereries. Drawell DW-FD Sereries 17 páginas.
Imprimir página
2)Broken part and symptom of failure (or Error code)
3)Purchasing date of machine
4)Operational information (including sterilizing articles)
Chapter 6 Maintenance&Care
1 .Daily care:
Sterilization chamber and chamber cover should be cleaned with soft cloth every day.
2.Weekly care:
1) The water in the sterilizer chamber must be changed every week, or change at any time
within one week if the water is dirty.
2) When changing the water, connect one end of the drainage hose with the drain port of
sterilizer chamber, and put the other end into a water collector, release the drainage valve
to drain, and turn off the valve counter-clockwise after the drainage.
★ Note:
〇 Make sure that the water in the sterilizer chamber is at room temperature before
changing the water.
〇 If the sterilizer will not be used for a long period of time, the water in the sterilizer
chamber must be emptied to avoid blocking the pipeline.
3) Wipe the surface of the sealing ring and its contact parts with soft and clean cloth at
least once a week.
3.Monthly care:
Take out the water plate to cheak the heating pipe.If dirt can be gently scrub with a soft
brush and flush，and then discharge the dirty water.
4.Yearly care:
1)Check the wires damage and problem of fuse and connector.
2)Check the pipe for leaks .
3)Check if there is leaking of the solenoid valve or lose of coil.
4)Check the indicator and process indicators (check the security of cover)
5)Press the testing button of leakage protection switch, if the leakage protection switch
trips means everything is normal,otherwise turn off the power switch and contact local
dealer. Press the reset switch,make the position up right，the power will be on.
5.Spare parts list offered by manufacturer or agents
No.
Spare
Drawell Scientific
No.
Spare parts
No.
Spare parts
No.
Spare parts