Drawell SMART Series Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Microscópio Drawell SMART Series. Drawell SMART Series 12 páginas. Biological microscope

SMART Series Biological Microscope

2.3.9 Filter: Built in blue filer

2.3.10 Electric components: Input voltage AC85-265V/LED AC170-270V, 50/60Hz

Output voltage DC1.2-6V/LED DC0.4-3.5V

6V/20W halogen lamp

Rotation potentiometer with power switch

Fuse 2A ф5×20

3. Installation

Please clean the operation desk before installation.

Put out the microscope of the carton and put it on

the desk.

Make sure the supply voltage meets the instrument's

requirement and the power switch is off.

Installation Instruction Fig.:

1. Turn the binocular (trinocular) head to working

position;

2. Put out the dust cover of the eyepiece tube;

3. Insert into the eyepiece;

4. Install Abbe Condenser

3.1 Eyepiece Tube:

Loose the Head Thrumb Screw G, turn the

tube to observing position, then tighten the

Screw G.

3.2 Put out the eyepiece dust cover.

3.3 Eyepiece

Put out the eyepiece of the carton, and insert it

into the tube. Please don't touch the lens of the

eyepiece by hand.

3.4 Condenser

Put out the condenser of the carton, then turn Condenser Focusing Knob M to lower condenser

installing

ring.

Loose

condenser screw, then install the

condenser,

and

make

condenser graduation face to the

front, Tighten the condenser

screw, and higher the condenser

Condenser

installing ring

Condenser

the

-５-

screw