Drawell SMART-e-500 Manual de instruções de funcionamento - Página 10
Procurar online ou descarregar pdf Manual de instruções de funcionamento para Microscópio Drawell SMART-e-500. Drawell SMART-e-500 16 páginas.
5 . Image System Operation
This product is equipped with various camera device, such as CMOS digital cameras, CCD camera and
VGA camera device etc, corresponding image output devices using the computer, LCD. And can choose by
0.5X or 1X optics cameras.
(1)Adaptor for Digital Camera
To CMOS digital cameras, for example, remove USB2.0 connection lines, insert the square plug in USB2.0
behind the Integrative trinocular head, insert another flat plug in USB2.0 , make sure solid and stable.
○
10
(2)Use Of Camera Device
After the connection, open image display equipment (such as computer and start image collector & analysis
software). Adjust microscope, adjust the eyepiece until clear image. Then open software to browse image
collector function, clear or basic clear image should also be on the screen (if isn't satisfied only slightly
rotating J、N micro focusing hand wheel), until get satisfactory imaging results.
Then can browse through the image acquisition software mode, or take images from the screen directly
observed
▲ The product has passed factory inspection that eyepiece observation and photographic camera device
adopt with synchronous size. General adjustment synchronous with eyepiece fixed diopter (only for
model with single diopter adjusting ), but also result in slight error because the difference of the vision,
can be adjusted depending on eyepiece diopter adjusting ring as benchmark. With double depending on
the degree of adjustment, please circle one "0" scale line for the datum is conducted on the basis of
regulating use.
Picture
-8-
Through
USB
transmittocomputer.
Integrative
Trinocular
Head