Drawmer DS201 Manual do operador - Página 3

Procurar online ou descarregar pdf Manual do operador para Equipamento de gravação Drawmer DS201. Drawmer DS201 14 páginas. Dual noise gate
Também para Drawmer DS201: Manual do operador (14 páginas)

Imprimir página

SAFETY CONSIDERATIONS

TO REDUCE THE RISK OF FIRE REPLACE THE MAINS FUSE ONLY WITH THE

SAME TYPE, WHICH MUST BE A CLASS 3, 230 VOLT, TIME DELAY TYPE,

RATED AT 32mA WHERE THE MAINS INPUT VOLTAGE SWITCH IS SET TO 230

VOLTS AC. AND 63mA WHERE THE MAINS INPUT VOLTAGE IS 115 VOLTS AC.

DO NOT

ATTEMPT TO CHANGE OR TAMPER WITH THE SUPPLIED MAINS

DO NOT

PERFORM ANY SERVICING. REFER ALL SERVICING TO

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS

This product is designed for standard 19" rack mounting and occupies 1U of rack space.

Use four M6 pan head screws to secure the unit into the rack. Fibre or plastic washers may

be used to prevent the front panel becoming marked by the mounting bolts.

Care should be taken in the choice of positioning. The unit should not be mounted

where other equipment obstructs the normal air flow. The unit should not be situated

near any heat source, such as a radiator, stove or a high power amplifier that would

generate heat.

The DS201 should not be operated near any water or in a location where moisture

might be present.

CAUTION - MAINS FUSE

ALL FUSES MUST COMPLY WITH IEC 127-2.

THE FUSE BODY SIZE IS 20mm x 5mm.

CAUTION - MAINS CABLE

CAUTION - SERVICING

QUALIFIED SERVICE PERSONNEL.

WARNING

EQUIPMENT TO RAIN OR MOISTURE.

INSTALLATION

CABLE.

-3-