Bosch 6 Series Manual do utilizador e instruções de instalação - Página 15

Restore the control panel cabling and the cabling

for the lighting.

The plug can only be inserted into one position.

Ensure that the connector has engaged correctly.

Fit the grease filters.

To avoid causing damage, do not bend the grease

filters.

Attach and close the filter cover.

Establishing the exhaust air connection

Secure the exhaust pipe to the air pipe connector.

Establish the connection to the exhaust air opening.

Seal the joints.

Establishing the connection for the circulated

air

The standard recirculation kit is available as an access-

ory.

Secure the exhaust pipe to the air pipe connector.

Connect the pipe to the opening on the fitted unit.

Screw the air guide grille to the fitted unit.

Seal the joints.

Connecting to the power supply

Insert the mains plug into the protective contact

socket.

If a fixed connection is required, follow the instruc-

tions in the section

→ "Instructions for the electrical connection",

Page 12.

Removing the appliance

WARNING ‒ Risk of injury!

Components inside the appliance may have sharp

edges.

Wear protective gloves.

▶

Disconnect the appliance from the power supply.

Loosen the exhaust pipe.

Open the filter cover if required.

Remove the grease filters.

To avoid causing damage, do not bend the grease

filters.

Remove the frame.

Undo the control panel cabling and cabling for the

lighting.

Loosen the screw connection with the fitted unit.

Slowly take the appliance down.

Installation instructions en