Bosch 8 Series Manual do utilizador e instruções de instalação - Página 17

Procurar online ou descarregar pdf Manual do utilizador e instruções de instalação para Forno Bosch 8 Series. Bosch 8 Series 32 páginas. Combi steam oven
Também para Bosch 8 Series: Manual de instruções de instalação (21 páginas), Instruções de montagem (4 páginas), Manual de instruções de instalação e utilização (16 páginas), Manual de referência rápida (2 páginas), Manual do utilizador e instruções de instalação (44 páginas), Começar a trabalhar (7 páginas), Manual de instruções (32 páginas), Manual do utilizador e instruções de instalação (32 páginas), Manual de instruções (12 páginas), Manual do utilizador e instruções de instalação (24 páginas), Manual do utilizador (28 páginas), Manual do utilizador e instruções de instalação (28 páginas), Manual de instruções de instalação e utilização (20 páginas), Manual do utilizador e instruções de instalação (44 páginas), Manual de instruções (12 páginas), Manual do utilizador e instruções de instalação (40 páginas), Informações de utilização (20 páginas), Manual de instruções (48 páginas)

Imprimir página
Bosch 8 Series Manual do utilizador e instruções de instalação
Dry with a soft cloth.
3.
14.6 Cleaning the accessories
Read the information on cleaning products.
1.
→ Page 16
Soften baked-on food remnants with a damp dish
2.
cloth and hot soapy water.
Clean the accessory with hot soapy water and a soft
3.
dish cloth or a scrubbing brush.
Clean the wire rack with stainless steel cleaner or in
4.
the dishwasher.
Use steel wool or oven cleaner to remove very
heavy soiling.
Dry with a soft cloth.
5.
14.7 Cleaning the door panels
ATTENTION!
Incorrect cleaning may damage the door panes.
Do not use a glass scraper.
▶
Read the information on cleaning products.
1.
→ Page 16
Clean the door panels with a soft dish cloth and
2.
glass cleaner.
Note: Shadows on the door panels, which look like
streaks, are caused by reflections made by the in-
terior lighting.
Dry with a soft cloth.
3.
15  Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
If the appliance is defective, call Customer Service.
▶
15.1 Malfunctions
Fault
The appliance is not
working.
Cause and troubleshooting
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker in the fuse box has tripped.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your kitchen or other appliances are working.
▶
14.8 Cleaning the door seal
ATTENTION!
Incorrect cleaning may damage the door seal.
Do not use metal scrapers or glass scrapers for
▶
cleaning.
Do not use abrasive cleaning agents.
▶
Read the information on cleaning products.
1.
→ Page 16
Clean the door seal with hot soapy water and a soft
2.
dish cloth.
Dry with a soft cloth.
3.
14.9 Cleaning aid
The cleaning aid is a quick alternative for occasionally
cleaning the cooking compartment. The cleaning aid
softens dirt by vaporising the soapy water. The dirt can
then be removed more easily.
Setting the cleaning aid
Add a few drops of washing-up liquid to a cup of
1.
water.
Place a spoon in the cup to prevent delayed boiling.
2.
Place the cup in the centre of the cooking compart-
3.
ment.
Set the microwave output to 600 W.
4.
Set the cooking time to 5 minutes.
5.
Start the microwave.
6.
Once the cooking time has elapsed, leave the doors
7.
closed for an additional three minutes.
Wipe out the cooking compartment with a soft cloth.
8.
Leave the cooking compartment to dry with the door
9.
open.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
Only use genuine spare parts when repairing the
▶
appliance.
If the power cord of this appliance is damaged, it
▶
must be replaced by the manufacturer, the manufac-
turer's Customer Service or a similarly qualified per-
son in order to prevent any risk.
Troubleshooting en
17