Bosch 800 Series Manual de instruções - Página 9

Imprimir página

Three-wire Connection

Grounded Neutral

Install Appliance

Note: The appliance is heavy. It is advisable to install it

with a second person.

NOTICE: Before installing the appliance, be sure to

verify the cabinet dimensions and electrical connections.

Mount to Cabinet

Fully insert the appliance and center it. Do not kink the

electrical cable.

Screw the appliance into place.

Testing Operation

Turn on power at the breaker.

For Model HMC80252UC and HMCP0252UC: Check

power at junction box using a volt meter.

For 240 V installation, the reading between the red

and black wires (line to line) should be 220 to

240 volts.

For 208 V installation, the reading between the red

and black wires (line to line) should be 190 to

208 volts.

For all models: Test the oven mode.

Select the CONVECTION mode. See the Use and Care

Manual for detailed operation instructions.

Verify that the oven light comes on and the oven

begins to preheat.

Connect red wire from oven to red wire in junction box.

▯

Connect black wire from oven to black wire in junction

▯

box.

Connect both green ground wire and white wire from

▯

oven to white, green or bare neutral wire in junction

box.

The conduit cable, where connected at the oven, swivels.

Rotate conduit cable upward (or downward) and direct

through hole prepared in cabinet to attach to junction

box.

To maintain serviceability, the flex conduit must not be

shortened and should be routed to permit temporary

removal of the oven.

Test the microwave:

Place a cup of water into the oven cavity. Follow the

instructions in the Use and Care Manual on how to

heat a beverage.

Verify that the oven light comes on and the water is

heated.

If any of the tests do not result as explained above,

contact Service for assistance. Otherwise, the

installation is complete at this time.