Draytek Vigor 2600 VGST Manual de auto-instalação - Página 4
Procurar online ou descarregar pdf Manual de auto-instalação para Router de rede Draytek Vigor 2600 VGST. Draytek Vigor 2600 VGST 10 páginas. Dsl router
Imprimir página
Follow the installation steps bellow:
1. Pull out the cable connecting other devices,
such as a telephone, other telephone sockets,
fax, or modem, from the telephone socket.
2. Plug the pulled-out cable end to the splitter
port labelled PHONE.
6
> Self-Installation Guide
3. Use the separate cable included in the
installation package (both jacks identical
– RJ 11) to connect the telephone socket with
the splitter port labelled LINE.
4. Use the other cable (with connectors of
different sizes), to connect DSL router
DrayTek Vigor 2600 VGST with the splitter.
Plug the bigger connector of the cable into
the larger port on the back of the DSL router
labelled ADSL; plug the smaller connector of
the cable in the splitter port labelled DSL.
5. Proceed with the DSL router installation by
following the instructions on page 14.
> DSL router DrayTek Vigor 2600 VGST
7