Bosch Benchmark Series Manual de instruções de instalação - Página 12

Procurar online ou descarregar pdf Manual de instruções de instalação para Forno Bosch Benchmark Series. Bosch Benchmark Series 40 páginas. Built-in wall ovens
Também para Bosch Benchmark Series: Manual de serviço (36 páginas), Manual de instalação (32 páginas), Manual de referência rápida (4 páginas), Manual de serviço (45 páginas), Manual de início rápido e de segurança (13 páginas)

Connect Electrical Supply

WARNING

RISK OF ELECTRIC SHOCK

Before wiring the appliance, interrupt the main

electrical circuit at the electrical control cabinet. A

circuit with 120 VAC, 15 or 20 Ampere is required.

Grounding notes: this appliance is equipped with a

distributor box with 3 cables. Use the green-yellow

cable for grounding the appliance. Connect the

green-yellow cable to the grounding cable on the

house connection to prevent electric sthock. Do not

under any circumstances damage or remove the

green-yellow cable. Non-adherence can cause

deadly injuries or electric shock.

Remove the left cable passage and the cover of the

motor controller. Fasten the connecting piece for the

installation pipe (listed in cULUS) to the cable

passage.

Cable passage

Cover of the motor controller

Connect 1/2" (12.7 mm) installation pipe to motor

controller.

Installation pipe

Power connection

Cable connector listed in UL

Hidden surfaces may have sharp edges. Use caution

when reaching behind or under appliance.

Remove the protective foil from both flue ducts.

Push one flue duct into the other.

Notes

To prevent scratches, lay paper over the edges of

▯

the outer flue duct to protect the surface.

For ducted operation, turn the upper flue duct so

▯

that the ventilation slots point downward.

Remove the protective foil from the extractor hood.

Place flue ducts on the appliance.

Push the inner flue duct upwards and attach it to the

angle brackets on the left and right.

Screw the flue duct to the sides of the angle bracket

using two screws.