Bosch CMG656R.1I Manual do utilizador e instruções de instalação - Página 18
Procurar online ou descarregar pdf Manual do utilizador e instruções de instalação para Forno Bosch CMG656R.1I. Bosch CMG656R.1I 48 páginas.
Imprimir página
en Meat probe
Press the cooking time and use the control ring to
6.
set the cooking time.
Press to start.
7.
a The appliance starts to heat and the cooking time
counts down.
a When the time has elapsed, a signal sounds. The
time shown in the display is zero.
When the cooking time has elapsed:
8.
To stop the signal early, press any touch field.
‒
If necessary, set a combination again.
‒
When the food is ready, press
‒
appliance off.
Changing the temperature
Once the MicroCombi operation has started, you can
change the temperature directly.
Use the control ring to change the temperature.
▶
a The change is applied immediately.
12 Meat probe
Cook with precision by inserting the meat probe into
the food and setting a core temperature on the appli-
ance. Once the set core temperature has been
reached in the food, the appliance automatically stops
heating.
12.1 Suitable types of heating with the meat
probe
Only certain types of heating are suitable for use with
the meat probe.
Once you have placed the meat probe in the cooking
compartment, the following types of heating are
available for you to select.
¡ 4D hot air
¡ Top/bottom heating
¡ Hot air eco
¡ Top/bottom heating eco
¡ Circulated air grilling
¡ Pizza setting
12.2 Inserting the meat thermometer
Use the meat probe supplied or order a suitable meat
probe from our after-sales service.
WARNING ‒ Risk of electric shock!
Using the wrong meat probe could damage the insula-
tion.
Only use the meat probe for this specific appliance.
▶
ATTENTION!
Otherwise the meat probe may be damaged.
Do not trap the cable of the meat probe.
▶
Do not use cookware with a lid.
▶
To prevent the meat probe from being damaged by
▶
excessive heat, there must be a gap of a few centi-
metres between the grill element and the meat
probe. The meat may expand during the cooking
process.
18
to switch the
Changing the cooking time
After the start of the MicroCombi operation, you can
change the cooking time at any time.
Press "Cooking time".
1.
Use the control ring to change the cooking time.
2.
a The change is applied immediately.
Changing the combination
If you change the combination of the type of heating
and the microwave power setting, all of the other set-
tings are reset.
Press to pause operation.
1.
Change the type of heating or microwave power set-
2.
ting.
To change the microwave power setting, press
‒
on the microwave and change the microwave
power setting.
To change the type of heating, press on the type
‒
of heating and change the type of heating. Then
set the microwave power setting.
Press to continue operation.
3.
If, during operation with the microwave, the tip of the
meat probe is not fully inside the food, sparks will be
created.
Insert the meat probe fully into the food.
▶
Insert the meat probe into the food.
1.
The meat probe has three measuring points. Ensure
that at least the middle measuring point is inserted
in the food.
Thin
Insert the meat probe into the thickest
pieces
part of the meat from the side.
of meat
Thick
Insert the meat probe diagonally into the
pieces
meat from above, pushing it in as far as
of meat
possible.