Bosch CMG7241 2 Series Manual do utilizador e instruções de instalação - Página 18

Procurar online ou descarregar pdf Manual do utilizador e instruções de instalação para Forno Bosch CMG7241 2 Series. Bosch CMG7241 2 Series 48 páginas.

Imprimir página
en Microwave
Possible microwave outputs combined with an
operating mode include:
¡ 90 watts
¡ 180 watts
¡ 360 watts
10.3 Setting the microwave
Note:
Note the correct way to operate the microwave:
¡ → "Safety", Page 2
¡ → "Preventing material damage", Page 6
¡ → "Microwave output settings", Page 11
¡ → "Cookware and accessories with microwave",
Page 17
1.
Press "Microwave" in the menu.
Or select the microwave directly using the
‒
ton.
2.
Press the
microwave output ("Boost").
3.
Use the setting ring to set the microwave output.
4.
To confirm the set microwave output, press
the display.
5.
Press
⁠ " Cooking time".
A cooking time must always be set to operate the
microwave.
6.
To change the preset cooking time, press the relev-
ant time value, e.g. minute display "m" or second
display "s".
a The selected value is marked in blue.
7.
Use the setting ring to set the cooking time.
If required, use
to reset the setting value.
8.
To confirm the set cooking time, press
play.
9.
Press
to start the operation.
a The microwave starts and the cooking time counts
down. The display shows the performance reduction
for the maximum microwave output "Boost".
→ "Microwave output settings", Page 11
a When the time has elapsed, a signal sounds. A noti-
fication appears on the display confirming that the
operation has finished.
10.
Once the cooking time has elapsed:
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
11.
If condensation has formed in the cooking compart-
ment, dry the cooking compartment.
→ "Drying", Page 26
Note: If you open the appliance door during operation,
the operation stops. If you close the appliance door,
you must continue the operation. If you have changed
18
but-
on
on the dis-
to switch the ap-
the basic setting for this, make sure that the microwave
does not resume operation without food inside.
→ "Basic settings", Page 21
Changing the microwave output
You can change the microwave output at any time.
1.
Press
on the display.
2.
Press the microwave output
3.
Use the setting ring to set the microwave output.
4.
To confirm the change, press
a The change is applied.
Changing the cooking time
You can change the cooking time at any time.
1.
Press
on the display.
2.
Press the cooking time
3.
Use the setting ring to change the cooking time.
4.
To confirm the change, press
a The change is applied.
10.4 Setting added microwave
Note:
Note the correct way to operate the microwave:
¡ → "Safety", Page 2
¡ → "Preventing material damage", Page 6
¡ → "Microwave output settings", Page 11
¡ → "Cookware and accessories with microwave",
Page 17
Requirement: Observe the information about the re-
spective operating mode.
→ "Setting options with the microwave", Page 17
1.
Press the operating mode that you require in the
menu.
2.
Select the settings for the operating mode, e.g. type
of heating and temperature.
3.
Press
⁠   "Added microwave".
4.
Use the setting ring to set the microwave output.
5.
To confirm the set microwave output, press
the display.
6.
Press
⁠ "Cooking time" and set the cooking time.
7.
Press
to start the operation.
a The appliance starts to heat and the time counts
down.
a When the time has elapsed, a signal sounds. A
message appears on the display confirming that the
operation has finished.
8.
Once the cooking time has elapsed:
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
⁠ .
on the display.
⁠ .
on the display.
on
to switch the ap-