Bosch CMG976K 1 Series Manual do utilizador e instruções de instalação - Página 22
Procurar online ou descarregar pdf Manual do utilizador e instruções de instalação para Forno Bosch CMG976K 1 Series. Bosch CMG976K 1 Series 48 páginas.
Imprimir página
en Home Connect
Personalisa-
Selection
tion
1
Dishes
¡ All
¡ No pork
¡ Kosher only
Childproof
¡ Door lock + keylock
lock
¡ Button lock only
¡ Deactivated
Automatic
¡ off
rapid heating
¡ On
1
Factory setting (may vary according to model)
Factory set-
Selection
tings
Factory set-
¡ Restore
tings
Info
Display
Appliance in-
Display technical information about
formation
the appliance.
16.2 Changing the basic settings
Press "Basic settings" in the menu.
1.
Press the required basic settings area.
2.
Press the required basic setting.
3.
17 Home Connect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
Tips
¡ Please consult the documents supplied by
Home Connect.
¡ Please also follow the instructions in the Home Con-
nect app.
Notes
¡ Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→ "Safety", Page 2
¡ Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
¡ In networked standby mode, the appliance requires
a maximum of 2 W.
22
1
1
Press to select the required basic setting.
4.
a The change is applied directly for most basic set-
tings.
To change additional basic settings, use
5.
back and select a different basic setting.
To exit the basic settings, use
6.
main menu or switch off the appliance using
a The changes are saved.
Note: Your changes to the basic settings will be re-
tained even after a power failure.
16.3 Setting the time
Press "Basic settings" in the menu.
1.
Press "Time".
2.
To set the time, press the hour display or the minute
3.
display.
a The selected value is marked in blue.
Use the setting ring to set the time.
4.
The minutes are counted in 5-minute increments.
‒
To set it to the precise minute, press and hold
the corresponding area in the setting ring for
around 1-2 seconds. The minutes are shown in
dots. Use the setting ring to set the minutes.
To exit the basic settings, use
5.
main menu or switch off the appliance using
a The time is saved.
17.1 Setting up Home Connect
Requirements
¡ The appliance is connected to the power supply and
is switched on.
¡ You have a mobile device with a current version of
the iOS or Android operating system, e.g. a smart-
phone.
¡ The mobile device and the appliance are within
range of your home network's Wi-Fi signal.
Download the Home Connect app.
1.
Open the Home Connect app and scan the follow-
2.
ing QR code.
Follow the instructions in the Home Connect app.
3.
to go
to go back to the
.
to go back to the
.