Bosch CSG656BS7B Manual do utilizador e instruções de instalação - Página 23

Procurar online ou descarregar pdf Manual do utilizador e instruções de instalação para Forno Bosch CSG656BS7B. Bosch CSG656BS7B 48 páginas. Combi steam oven

Imprimir página

Basic setting

Remote control

Appliance information

⁠

16.3 Operating the appliance with the

Home Connect app

When the Remote start function is activated, you can

use the Home Connect app to remotely configure the

appliance's settings and start it.

Note: Some operating modes can only be started on

the oven itself.

Requirements

¡ The appliance must be switched on.

¡ The appliance must be connected to your home net-

work and to the Home Connect app.

¡ To configure the appliance's settings using the

Home Connect app, "Remote control" must be

switched on in the basic settings. When the Remote

start function is deactivated, only the appliance's op-

erating statuses are displayed in the Home Con-

nect app.

Tap

⁠ .

Tap "Remote start".

a The display will show ⁠ .

Configure a setting in the Home Connect app and

send it to the appliance.

Notes

¡ If you open the appliance door within 15 minutes

of activating the Remote start function or of the

set program ending, the Remote start function

will be deactivated.

¡ When you start the oven using the controls on

the appliance itself, the Remote start function is

activated automatically. You can use the

Home Connect app to adjust the settings or start

a new program.

16.4 Software update

Your appliance's software can be updated using the

software update function, e.g. for the purposes of op-

timisation, troubleshooting or security updates.

To do this, you must be a registered Home Con-

nect user, have installed the app on your mobile device

and be connected to the Home Connect server.

As soon as a software update is available, you will be

informed via the Home Connect app and will be able to

start the software update via the app. Once the update

has been successfully downloaded, you can start in-

Possible settings

Off

Explanation

When this function is deactivated, all you can do is view the

appliance's operating status in the app.

When this function is activated, you can remotely start and

control the appliance.

The display shows information about the network or the appli-

ance.

stalling it via the Home Connect app if you are in your

WLAN home network (Wi-Fi). The Home Connect app

will inform you once installation is successful.

Notes

¡ You can continue to use your appliance as normal

while updates are downloading. Depending on your

personal settings in the app, software updates can

also be set to download automatically.

¡ We recommend that you install security updates as

soon as possible.

¡ Installation takes a few minutes. You cannot use

your appliance during installation.

16.5 Remote diagnostics

Customer Service can use Remote Diagnostics to ac-

cess your appliance if you contact them, have your ap-

pliance connected to the Home Connect server and if

Remote Diagnostics is available in the country in which

you are using the appliance.

Tip: For further information and details about the avail-

ability of Remote Diagnostics in your country, please

visit the service/support section of your local website:

www.home-connect.com

16.6 Data protection

Please see the information on data protection.

The first time your appliance is registered on a home

network connected to the Internet, your appliance will

transmit the following types of data to the

Home Connect server (initial registration):

¡ Unique appliance identification (consisting of appli-

ance codes as well as the MAC address of the Wi-Fi

communication module installed).

¡ Security certificate of the Wi-Fi communication mod-

ule (to ensure a secure data connection).

¡ The current software and hardware version of your

appliance.

¡ Status of any previous reset to factory settings.

This initial registration prepares the Home Connect

functions for use and is only required when you want to

use the Home Connect functions for the first time.

Note: Please note that the Home Connect functions

can only be utilised with the Home Connect app. In-

formation on data protection can be retrieved in the

Home Connect app.

Home Connect en