Bosch FAP-OC 500Series Informações sobre o produto - Página 28

Product Information 500 Series LSN Fire Detectors (EU)

Mounting notes for the external detector alarm display MPA

According to VdS guidelines, the external detector alarm display

must be mounted so that the flat side of the prism (Y) shows towards

the observer's line of sight.

19.

D Mounts directly on the ceiling or wall.

D For surface mounted cable entry (aP), break out the prepared cable entry points

(see Fig. 19., Pos. X) on the housing. For flush mounted cable entry (uP), cable

entry is through the opening below the connection board.

Connecting the external detector alarm display

The external detector alarm display is connected using 4 Wago terminals.

Connecting:

Disconnecting: pull out the wire while turning it to and fro.

Up to 4 detectors can be connected to each external detector alarm display.

Three inputs (T. 2 − 4) allow adjustment to the various line networks.

Making the connection depending on the line technology used

Line technology Fire panels

GLT

LSN

1 2 3 4

MPA

insert the stripped cable end (no braided wire) into the terminal.

BZ 1060

UEZ 1000, UGM 2020, FP 102, 104, 106

BZ 500 LSN, UEZ 1000, UEZ 2000 LSN,

UGM 2020, FPA−5000

Page 28

PI − 34.70 en

Terminals

T.1 + T.2

T.1 + T.3

T.1 + T.4

BDL−F.01U.025.876

A5.en/ 02.02.2006

ST−FIR/PRM1 / zab