Bosch FAP-OC 500Series Manual de instalação - Página 3

Imprimir página

Bosch FAP-OC 500Series Manual de instalação

9 IMPORTANT SAFEGUARDS

READ AND SAVE THESE INSTRUCTIONS

Safety

WARNING:

If the information in this manual is not followed exactly, fire

or shock may result causing property damage or personal

injury.

Read all instructions.

WARNING:

Do not repair or replace any part of the appliance unless

specifically recommended in the manuals. Improper

installation, service or maintenance can cause injury or

property damage. Refer to this manual for guidance. All

other servicing should be done by a qualified technician.

Appliance Handling Safety

Hidden surfaces may have sharp edges. Use caution when

reaching behind or under appliance.

Close supervision is necessary when any appliance is used

by or near children.

Do not touch hot surfaces. Use handles or knobs.

The use of accessory attachments not recommended by

the appliance manufacturer may cause injuries.

Do not use outdoors.

Do not place on or near a hot gas or electric burner, or in a

heated oven.

Do not use appliance for other than intended use.

Extreme caution must be used when moving an appliance

containing hot oil or other hot liquids.

To reduce the risk of fire, do not place any heating or

cooking appliance beneath the appliance.

To reduce the risk of fire, do not mount unit over or near

any portion of a heating or cooking appliance.

To reduce the risk of electric shock, do not mount over a

sink.

To reduce the risk of fire, do not store anything directly on

top of the appliance surface when the appliance is in

operation.

Safety Codes and Standards

This appliance complies with one or more of the following

Standards:

•

UL 1026 - Electric Household Cooking and Food

Serving Appliances

•

CSA-C22.2 No. 64 - Household cooking and Liquid-

Heating appliances

It is the responsibility of the owner and the installer to

determine if additional requirements and/or standards

apply to specific installations.

Electric Safety

Before you plug in the electrical cord, be sure all controls

are in the OFF position.

Do not let cord hang over edge of table or counter, or touch

hot surfaces.

Always attach plug to appliance first, the plug cord into wall

outlet. To disconnect, turn any control to "off", then remove

plug from wall outlet.

Do not operate any appliance with a damaged cord or plug

or after the appliance malfunctions or has been damaged in

any manner. Return the appliance to the nearest

authorized service facility for examination, repair or

adjustment.

To protect against electrical shock, do not immerise cord,

plugs, or other electrical parts in water or other liquid.

For appliances equipped with a cord and plug, do not cut or

remove the ground prong. It must be plugged into a

matching grounding type receptacle to avoid electrical

shock. If there is any doubt as to whether the wall

receptacle is properly grounded, the customer should have

it checked by a qualified electrician.

If required by the National Electrical Code (or Canadian

Electrical Code), this appliance must be installed on a

separate branch circuit.

Installer - show the owner the location of the circuit

breaker or fuse. Mark it for easy reference.

Important - Save these instructions for the local electrical

inspector's use.

English 1