AirStage UTY-CGGG Manual de instruções - Página 7

Procurar online ou descarregar pdf Manual de instruções para Controlo remoto AirStage UTY-CGGG. AirStage UTY-CGGG 9 páginas. Air conditioner remote controller (wired type)

Imprimir página

1. Operating Manual

● Setting the timer for the other indoor units:

1. Press the "

ENTER" button to confirm the set

timer.

2. Press again the "

JUST" button to complete the weekly timer set-

ting.

flashes for 2 seconds.

● To delete the operating time

To start/cancel the WEEKLY timer operation

The timer does not start if the time is not set.

Press the "ALL

Press the "

NOTES

(1) The WEEKLY timer does not operate when the HEAT timer is set if a HEAT PUMP MODEL in the air conditioning system

is operating in the cooling mode. In addition, the WEEKLY timer does not operate when the COOL or DRY timer is set if

a HEAT PUMP MODEL in the air conditioning system is operating in the heating mode.

(2) Even if the timer operation is set, the timer lamp of the indoor unit does not light up. (The timer lamp is used for

wireless remote controller only.)

(3) If the same time is set in Timer-1 to Timer-4 of an indoor unit, the timer setting of the smallest number will be effective.

(4) When all indoor units or all of the days are selected, current setting cannot be checked. When checking each indoor

unit or the day of the week, select an indoor unit or the day in the week to check it.

Before setting the timer for other indoor units, press the "

the settings.

* The display switches to the next timer.

● Repeat steps

CLOCK ADJUST

PROGRAM/

CLOCK AD-

1. If the "

time for the selected day will be deleted.

* If all the days are selected, the operating times for all of the days of the se-

lected timer will be deleted.

2. Press the "

" button to start or cancel the WEEKLY timers for all indoor units.

" button to select the indoor unit.

DELETE" button to start or cancel the WEEKLY timers.

to set the timer for other indoor units.

When the operating time is set, the

ex. TIMER-1 will start operation at 8:00 on COOL with a set-

ting of 28 °C.

DELETE" button is pressed during steps

ENTER" button to confirm the deletion.

• If any of the indoor units are in the timer mode, pressing this

button cancels the timers for all indoor units.

• If none of the indoor units are in the timer mode, pressing

this button starts the timers for all indoor units.

ENTER" button to confirm

mark appears.

, the operating

En-6