Bosch HB-Series-78C Manual de instruções - Página 23

Procurar online ou descarregar pdf Manual de instruções para Forno Bosch HB-Series-78C. Bosch HB-Series-78C 48 páginas.

Imprimir página

.Cleaning function

U se the "Pyrolytic self-cleaning" function to clean the

C l e a n i n g f u n c t i o n

cooking compartment.

You can choose from three cleaning cycles.

Cycle

Cleaning perfor-

mance

Gentle

Medium

Intensive

The dirtier the cooking compartment and the longer the

dirt has been there, the more powerful the cleaning

cycle should be. It is sufficient to clean the cooking

compartment every two to three months. You can clean

it more frequently if necessary. Cleaning requires

approx. 2.5-4.8 kilowatt hours.

Notes

For safety reasons, the appliance door locks

■

automatically once a certain temperature is reached.

You will not be able to open it again until the lock

symbol n on the display has gone out.

The interior lighting will not come on while the

■

appliance is being cleaned.

Warning

Risk of burns!

The cooking compartment becomes extremely hot

■

during the cleaning function. Never open the

appliance door. Allow the appliance to cool down.

Keep children away from the appliance.

; The appliance becomes very hot on the outside

Risk of burns!

■

during the cleaning function. Never touch the

appliance door. Allow the appliance to cool down.

Keep children at a safe distance.

Warning

Risk of harm to health!

The cleaning function heats up the cooking

compartment to a very high temperature so that food

remnants left over from roasting, grilling and baking will

burn off.This process releases vapours, which can

irritate the mucous membranes. While the cleaning

function is running, keep the kitchen well ventilated. Do

not remain in the room for long periods. Keep children

and pets away. Follow the instructions even when using

the Delayed start function with a delayed end time.

Before running the cleaning function

Make sure that the cooking compartment is empty.

Remove any accessories, cookware or shelf rails from

the cooking compartment. Please see the relevant

section for information on how to remove the rails.

~ "Rails" on page 24

Clean the appliance door and along the edges of the

cooking compartment in the area around the seal. Do

not scrub or remove the seal.

Length of cycle

Approx. 1 hour and 15 minutes

Approx. 1 hour and 30 minutes

Approx. 2 hours

Warning

Risk of fire!

Loose food remnants, fat and meat juices may catch

■

fire when the cleaning function is in progress. Before

you start the cleaning function, always remove the

worst of the food residues and remnants from the

cooking compartment.Do not use the cleaning

function for cleaning accessories.

The appliance will become very hot on the outside

Risk of fire!

■

during the cleaning function. Never hang

combustible objects, e.g. tea towels, on the door

handle. Do not place anything against the front of

the appliance. Keep children away from the

appliance.

If the door seal is damaged, a large amount of heat

Risk of fire!

■

will be generated around the door. Do not scrub or

remove the seal. Never operate the appliance if the

seal is damaged or missing.

Setting the cleaning function

Make sure you follow all the preparation instructions

before setting the cleaning function.

The length of time each cleaning cycle runs for has

been preset and cannot be changed.

Use the function selector to set Pyrolytic self-

clean q.

Use the temperature selector to set the cleaning

cycle.

The length of each cycle will appear on the display.

The cleaning function will start in a few seconds. The

remaining time will count down on the display.

Ventilate the kitchen while the cleaning function is

running.

The appliance door will lock shortly after the

programme starts running. The n symbol will appear on

the display.

An audible signal will sound when the cleaning function

has finished. The time on the display will be zero.

Switch the appliance off by turning the function selector

to the "Off" position.

You will not be able to open the appliance door again

until the cooking compartment has cooled down

sufficiently and the lock symbol n on the display has

gone out.

Delaying the end time

You can delay the end time if required. Before starting,

touch the v button until the "End" symbol is highlighted

on the display. Use the @ button to delay the end time.

The appliance will switch to standby after it is started.

Cleaning function