AirStage UTY-LNH series Manual de instruções - Página 9

Procurar online ou descarregar pdf Manual de instruções para Controlo remoto AirStage UTY-LNH series. AirStage UTY-LNH series 16 páginas. Air conditioner remote controller wireless type
Também para AirStage UTY-LNH series: Manual de instruções (15 páginas)

Imprimir página

SLEEP TIMER OPERATION

Unlike other timer functions, the SLEEP timer is used to set the length of time until air conditioner operate is stopped.

To Use the SLEEP Timer

While the air conditioner is operating or stopped, press the

SLEEP button.

The receiver unit control panel's OPERATION Indicator Lamp (green) lights and the

TIMER Indicator Lamp (orange) light.

To Change the Timer Settings

Press the SLEEP button once again and set the time using the

TIMER SET (

button: Press to advance the time.

button: Press to reverse the time.

About five seconds later, the entire display will reappear.

About the SLEEP Timer

To prevent excessive warming or cooling during sleep, the SLEEP timer function automatically modifies the thermostat setting

in accordance with the set time setting. When the set time has elapsed, the air conditioner completely stops.

Based on temperature set in remote control unit, temperature of indoor unit varies little by little. However in this case, tem-

perature indication of remote control unit does not vary as it continues to indicate the temperature when SLEEP Timer was set.

During Heating operation (Indoor unit):

When the SLEEP timer is set, the thermostat setting is

automatically lowered 1 °C every thirty minutes. When the

thermostat has been lowered a total of 4 °C, the thermostat

setting at that time is maintained until the set time has elapsed,

at which time the air conditioner automatically turns off.

SLEEP timer setting

minutes

1 hour

30 minutes

MANUAL AUTO OPERATION

Use the MANUAL AUTO operation in the event the remote control unit is lost or otherwise unavailable.

How To Use the Main Unit Controls

Press the MANUAL AUTO button on the receiver unit control

panel.

To stop operation, press the MANUAL AUTO button once again.

) buttons.

1 °C

2 °C

3 °C

4 °C

Set time

To Cancel the Timer:

Use the TIMER MODE button to select

"CANCEL".

The air conditioner will return to normal

operation.

To Stop the Air Conditioner During

Timer Operation:

Press the START/STOP button.

During Cooling/Dry operation (Indoor unit):

When the SLEEP timer is set, the thermostat setting is auto-

matically raised 1 °C every 1 hour. When the thermostat has

been raised a total of 2 °C, the thermostat setting at that time

is maintained until the set time has elapsed, at which time the

air conditioner automatically turns off.

SLEEP timer setting

Set time

1 hour

1 °C

G When the air conditioner is operated

with the controls on the receiver unit,

it will operate under the same mode

as the AUTO mode selected on the re-

mote control unit.

However, about Multi-type Air condi-

tioner, the Heat pump model will fol-

low the operating mode of the other

indoor unit.

G The fan speed selected will be "AUTO"

and the thermostat setting will be

24 °C.

2 °C

En-8