Bdcom S1010-8P-120 Manual do utilizador - Página 3

Procurar online ou descarregar pdf Manual do utilizador para Interruptor Bdcom S1010-8P-120. Bdcom S1010-8P-120 9 páginas. 100m poe switch

Extend: Up to 250m PoE distance.it allows you to expand you network via Ethernet cable to where there is no power

Line or outlet but where you want to ﬁx device such as IP Cameras.

LED indicator

LED

Color

Green

PWR

LNK/ACT

Green

PoE

Orange

The Front Panel of the S1006-4P-65 consists of 6-Por t 10/100M Auto-Nego a on Ethernet R J45 Por ts, The LED

indicators also on located on the panel.

PoE

BDCOM S1006-4P-65

DATA

DIP Switch

4*10/100Mbps PoE Port

2*10/100Mbps Port

DIP Switch

The DIP switch is located in the le panel.

Default mode: when open default mode ,the poe switch can normally communicate between port 1~6

CCTV mode: 1-4 port can be isolated each other .but 1-4 port can connect to 5, 6 port a er open CCTV to stop

broadcast storm which can increase forwarding rate of frame. The CCTV mode, allows you to expand you network via

Ethernet cable to where no power line or outlet .

Note: A er change the mode, in order to the corresponding conﬁgura on take eﬀect.the PoE switch need to restart

manually restart the PoE switch.

Oﬀ: No Power supply.

Light: Indicates the switch has power.

Oﬀ: No device is connected to the corresponding port.

Light: Indicates the link through that port is successfully

Established at 10/100Mbps.

Blink: Indicates that the Switch is ac vely sending or

Receiving data over that port.

Oﬀ: No PoE powered device (PD) connected.

Light: There is a PoE PD connected to be port, which

Supply power successfully.

Blink: Indicates port abnormal power supply.

10/100M

CCTV

OFF ON

PoE

Func on

Power