Bdcom S1216 Manual de instruções de hardware - Página 17

Procurar online ou descarregar pdf Manual de instruções de hardware para Interruptor Bdcom S1216. Bdcom S1216 19 páginas.

Chapter 5 Switch Maintenance

Warning:

Ensure static electricity emission of your body before openning the chassis. Please read "Safety

Notices" before any operating in appendixB after closing the switch..

Please unlatch power pin when operate near or on the Switch.

This section introduces how to open the chassis and the tools needed and operating

methods.

Warning:

Do not touch the power supply to avoid any hurting when the power cord is connected.

It maybe need some tools which are not provided as the standard equipment with the

Switch, as the folllowing:

cross screw-driver;

Electrostatic discharge-pretective wrist strap.

Opening the Switch top as the following steps：

(1)

Close the power switch（press the switch to OFF side）;

(2)

Disconnect all cables from the rear panel of the Sitch;

(3)

Drive off the screw on fixed top by screw-driver as figure 1 ;

Note:

The chassis is consist of the top and bottom.

(4)

Holding the chassis with both hands, position it as shown in the following figure.

BDCOM S2116 Switch Hardware Installation Guide

- 15 -