Bdcom S2510PB Manual de instalação do hardware - Página 15
Procurar online ou descarregar pdf Manual de instalação do hardware para Interruptor Bdcom S2510PB. Bdcom S2510PB 19 páginas.
Imprimir página
2
3
4
5
6
7
8
The direct-through or cross network cable has the function of auto-identification, so the five
classes of direct-through/cross network cables can be used to connect other Ethernet devices.
3.4 Checkup after Installation
Before feeding power to start the switch, perform the following checkups after the switch is
installed:
If the switch is installed on the DIN rail, check whether the installation is strong.
If the switch is installed on the desk, check whether there is enough space for the switch to
discharge its heat and whether the desk is stable.
Check whether the connected power supply meets the power requirements of
the switch.
Check whether the grounding line of S2510PB is correctly connected.
Check whether S2510PB is correctly connected to other terminal devices.
the data
Sending the paraphase of the
data
Receiving the normal phase of
the data
Sending the normal phase of
the data
Sending the paraphase of the
data
Receiving the paraphase of
the data
Receiving the paraphase of
the data
Sending the paraphase of the
data
S2510PB Hardware Installation Manual
TXD1-
RXD1+
TXD2+
TXD2-
RXD1-
RXD2+
RXD1-
Output
Input
Output
Output
Input
Input
Input
- 13 -