Bdcom S2956 series Manual de instalação do hardware - Página 9

Procurar online ou descarregar pdf Manual de instalação do hardware para Interruptor Bdcom S2956 series. Bdcom S2956 series 19 páginas.

Ensure that nice ventilation is provided for the devices installed at the bottom of

the cabinet.

The clapboard separates exhaust gas and inflow air, and boost the cool air to

flow in the chassis. The best location of the clapboard is decided by the air flow

mode in the chassis, which can be obtained through different location tests.

2.3.4 Power Requirements

Make sure that the power supply has nice grounding and the power at the input side of

the switch is reliable. The voltage control can be installed if necessary. At least a 240 V

and 10A fuse or a breaker is provided in the phase line if you prepare the short-circuit

prevention measures for a building.

Caution:

If the power supply system does not have good grounding, or the input power disturbs

too much and excessive pulses exist, the error code rate of communication devices

increases and even the hardware system will be damaged.

The tools and devices to install the S2956 switch are not provided by the S2956 switch.

You yourself need to prepare them. The following are the tools and devices needed for

the typical installation of the S2956 switch:

Screwdriver

Static armguard

Bolt

Ethernet cable

Other Ethernet terminal devices

Control terminal

S2956 Hardware Installation Manual

- 7 -