Draytek VigorSwitch G2100 Manual de início rápido - Página 3
Procurar online ou descarregar pdf Manual de início rápido para Interruptor Draytek VigorSwitch G2100. Draytek VigorSwitch G2100 8 páginas. L2+ managed switch
Também para Draytek VigorSwitch G2100: Manual de início rápido (9 páginas), Manual de início rápido (9 páginas)
Imprimir página
2
.
P
a
n
e
l
E
x
p
2
.
P
a
n
e
l
E
x
p
Status
LED
On (Green)
RJ 45
LNK/ACT
On (Amber)
Port 1 ~ 8
Blinking
Off
On (Green)
Port 9 ~ 10
SFP
On (Amber)
LNK/ACT
Blinking
Off
On (Green)
SYS
Blinking (Green)
Off
On
PWR
Off
Interface
RJ 45 LNK/ACT Port 1 ~ 8
Console
SFP LNK/ACT Port 9 ~ 10
RST
l
a
n
a
t
i
o
n
l
a
n
a
t
i
o
n
RJ45 LNK/ACT
Port 1 to Port 8
Explanation
The device is connected with 1000Mbps.
The device is connected with 10/100Mbps.
The system is sending or receiving data through the port.
The port is disconnected or the link is failed.
The device is connected with 1000Mbps.
The device is connected with 10/100Mbps.
The system is sending or receiving data through the port.
The port is disconnected or the link is failed.
The switch finishes system booting and the system is ready.
The switch is powered on and starts system booting.
The power is off or the system is not ready / malfunctioning.
The device is powered on.
The device is powered off.
Description
Port 1 to Port 8 can be used for Ethernet connection.
Used to perform telnet command control.
Port 9 to Port 10 are used for fiber connection.
Factory reset button.
Press it to reboot the system. (<5 seconds) The SYS LED will
blink too.
Press it to reset the system with factory default settings.
(5~20 seconds)
The SYS LED will be off if RST button is pressed between 5
seconds and 10 seconds.
Power inlet for AC input (100~240V/AC, 50/60Hz).
CONSOLE
2
SFP
LNK/ACT