BDE 2010 Manual do utilizador - Página 2

Procurar online ou descarregar pdf Manual do utilizador para Acessórios BDE 2010. BDE 2010 6 páginas.

Imprimir página
Chapter 3 Keys
ON/ OFF Turn on or off the power.
Zero The indicator will return to the center of ZERO if the weight value is within the set zero range.
Press "Enter" key when setting parameters or other functions.
Tare The indicator switches to NET mode, ZERO's the display and stores the TARE weight in
Memory. Press Zero and Tare key together in normal weighing mode will turn on/off animal
scale function. (when enter/escape animal scale mode, you will hear beep twice)
MR
Memory recall key, show total accumulate weight in memory.
In setting mode, this key used to move active digits right.
M+
Accumulate key, store current weight in memory.
In setting mode, this key used to move active digits left.
Press M+ and MR key for MC (memory clear)
Print Press Print during self checking will enter setting mode.
G/N
Weighing unit shift.
Secondary function (ESC) , is to return to normal operation when the scale is in a parameter
setting mode.
Press G/N and Print key together for setting check Weighing limit.
Chapter 4 Check Weighing (by buzzer)
4-1 About check-weighing
Check-weighing is a procedure to cause an alarm to sound when the weight on the scale meets or
exceeds values stored in memory. The memory holds values for a high limit and a low limit.
Check mode OK:
When checking the range, the display will show OK and the beeper will sound when the weight is
between the limits.
Check mode NG:
When check range, the display will show OK and the beeper will sound when the weight is out of the
limits.
4-2 Set limits
Press G/N and PRINT key together, it will display "set h", use TARE key to select "SET H" or "SET L",
press ZERO key to enter, use M+ and MR key to move digit, use TARE key to change value, use
Print key to clear value. After you enter the value, press ZERO key to confrim, press G/N key to
escape.
4-3 Set check weighing mode
Press G/N and print key together, it will display "set h", use TARE key to reach beep, press ZERO
key to enter, press TARE key to select ok(check mode OK), NG (check mode NG), no(no beep), press
ZERO key to sure, press G/N key to escape.
4-4 NOTE
Check weighing function only available when weight more than 20 divisions. To disable the Check
Weighing function enter zero into both limits by pressing the PRINT key when the current limits are
shown then pressing ZERO to store the zero values.
Chapter 5 Accumulation
The weight displayed will be stored in memory when the M+ key is pressed and the weight is stable.
The display will show "ACC 1" and then the total in memory for 2 seconds before returning to normal.
(after do accumulate operate, "M+" indicator will turn on)
Remove the weight, allowing the scale to return to zero and put a second weight on. Press the M+ key,
the display will show "ACC 2" and then the new total.
- 2 -
First Philippines Scales BDE 2010