Draytek Vigor VigorAccess Manual de início rápido - Página 16
Procurar online ou descarregar pdf Manual de início rápido para Hardware de rede Draytek Vigor VigorAccess. Draytek Vigor VigorAccess 17 páginas. Draytek vigor vigoraccess: quick start
Também para Draytek Vigor VigorAccess: Especificações (2 páginas)
Imprimir página
How to Upgrade Full Image Remotely
Users can use the following command to remotely upgrade full image. Make sure you have prepared
TFTP server, vendor supplied TEImage.bin.gz, and put TEImage.bin.gz into root directory of TFTP
server. The commands are listed as below.
Command
$reboot config safe
$create ethernet intf ifname eth-0 ip <ip_address> mask <mask>
$download src TEImage.bin.gz dest /nvram/TEImage.bin ip <server_ip>
(or $download src TEImage.bin.gz dest /nvram/image/ ip <server_ip> for version 2.10.x and
onwards)
Downloading the File.
...........................................................
Download file size is 1991180
Check if TEImage.bin shall uncompress
Uncompressing "TEImage.bin.gz" (11990111->4194304)......
TEImage.bin.gz is in proper format
Unlocking Flash........
Unlock successful
Erasing Flash ........................................
Erasing successful
Starting to Uncompress TEImage.bin.gz and Burn Flash
Uncompressing "TEImage.bin.gz" (1990111->4194304)......
#########################
Flash Programmed successfully
Done.
Download session Completed, Bytes received 1991180...
$
$reboot
Wizard Commands
In addition to the primitive commands described as above. Several wizard commands are provided which
is used easily. Type wizard to see the command syntax.
Command
$ wizard
<List of Wizard Commands>
---------------------------------------------------------------
dsl show [fast]
alarm show
pvc show
pvc create <dsl: 1~24> <vc: 1~8> <vpi> <vci> [<llcmux|vcmux>] [<interleaved|fast>]
pvc delete <dsl: 1~24> <vc: 1~8>
bridge delete <bridge id: 1~193>
tca show <acked>
critical show <acked>
firmware upgrade [-]<source file> <CP|DP|FD|DSL> <server ip>
fd show
port <disable|enable|restart> <dsl: 1~24>
config backup <filename> <server ip>
config restore <filename> <server ip>
---------------------------------------------------------
dsl show [fast]
firmware upgrade
config backup/restore
14
Description
Reboot from Safe mode
Reboot from Default mode
Description
Display all the 24 ports DSL status
Upgrade firmware without removing the existing one
in advance
Backup or restore the current configuration
Quick Start Guide for VigorAccess