Drazice TO 10.1 UP/IN Manual de operação e instalação - Página 8

Procurar online ou descarregar pdf Manual de operação e instalação para Aquecedor de água Drazice TO 10.1 UP/IN. Drazice TO 10.1 UP/IN 14 páginas.

We recommend that the hot water distribution from the heater was as short as possible

to minimize heat losses.

Heaters TO UP must be provided with a discharge valve mounted on the cold service water

inlet to the heater for potential disassembly or repair.

When assembling the security equipment, follow the standard.

8 ELECTRIC INSTALLATION

The electrical wiring scheme is attached in the manual to the water heater (Figure 4). The heater must be

connected via a separate supply with a circuit breaker. The heater is connected to the 230V/50Hz mains with

a power cable by inserting the plug into the socket. The electrical installation must comply with valid electrical

and technical standards. The connection of the heater to the electrical network is made after the water

supply installation of the heater and the filling of the heater with water.

Follow the rules of protection against electrical injuries in accordance with standard CSN 33 2000 - 4 - 41.

The degree of protection of the electrical parts of the heater is IP X5.

After connecting the heater to the water supply network, the heater can be put into operation.

Procedure:

check the electric and water main installation

open the hot water valve on the combination faucet

open the cold water inlet valve to the heater

as soon as the water starts running through the hot water valve, the heater is filled and the valve

closes

using the front-end main switch open electricity and thus the heater activates

Before first use, or after longer periods, it is necessary to ensure flushing, irrigation

and ventilation heater before starting the heating. The first heating tank must be monitored.

- 8 -