CARLO GAVAZZI CA12CLC08BPM1RT Manual do utilizador

Procurar online ou descarregar pdf Manual do utilizador para Acessórios CARLO GAVAZZI CA12CLC08BPM1RT. CARLO GAVAZZI CA12CLC08BPM1RT 2 páginas. Capacitive level sensors

Imprimir página
15-029-506_MAN M12 ENG_MAN M12 26-09-2012 13:46 Page 1
Wiring Diagram
(4)
BK
I
< 200 mA (CA12)
LOAD
WH
(2)
The PNP- or NPN-load will automatically be detected.
By means of the Teach-in wire, the functions described in the Teach-in
Guide can be set up.
It is possible to Teach-in more sensors at the same time by connecting
the WH-wires in parallel to the common "-" supply.
(#): Plug connections
To avoid interference from inductive
voltage/ current peaks, separate the
prox. switch power cables from any
other power cables, e.g. motor,
contactor or solenoid cables
Rated operational volt. (U
Ripple
Rated operational current (I
BN+
(1)
Output
I
ALARM
Protection
< 20mA
TM
TRIPLESHIEL
protection-EMC
IEC 1000-4-2/EN 61000-4-2
IEC 1000-4-3/EN 61000-4-3
Teach-in
IEC 1000-4-4/EN 61000-4-4
IEC 1000-4-6/EN 61000-4-6
BU-
(3)
Rated operating distance (S
Operating temperature
Storage temperature
Degree of protection
Installation Hints
Relief of cable strain
Protection of the sensing face
The cable should not be
A proximity switch should not
pulled
serve as mechanical stop
Specifications
)
10 to 40 VDC (ripple incl.)
B
≤ 10%
)
≤ 200 mA (continuous)
e
Transistor, NPN and PNP, NO and NC
(factory setting is NO)
Reverse polarity, short-circuit, transients
30 kV
> 15 V/m
3 kV
> 10 V
rm
)
0 - 8 mm
n
-20° --> +85°C (-4° --> +185°F)
-40° --> +85°C (-40° --> +185°F)
IP 68
Switch mounted on mobile carrier
Any repetitive flexing of the cable should
be avoided
Capacitive Level Sensors M12
Transistor Output with Teach-in
User Manual
CARLO GAVAZZI INDUSTRI A/S
Over Hadstenvej 40, DK-8370 Hadsten
Phone/Telefon: +45 89 60 61 00
Fax: +45 86 98 25 22
www.carlogavazzi.com/ac
Certified in accordance with ISO 9001
MAN M12 ENG rev. 01-09.12