Bosch Series 4 Manual de instruções de instalação e utilização - Página 8

Cleaning and maintenance

Activated charcoal filters

Activated charcoal filters bind odorous substances in

air recirculation mode. With normal use (approx. 1–2

hours a day), the activated charcoal filter should be

replaced twice a year.

Notes

The activated charcoal filter is not included with the

■

appliance. The activated charcoal filter is available

from specialist retailers, from our after-sales service

or from our online shop.

The activated charcoal filter cannot be cleaned or

■

reactivated.

Activated charcoal filters do not contain any harmful

■

substances and can be disposed of with your

normal household waste.

Fitting the activated charcoal filter

Remove the metal grease filter.

Insert the screw through the wing nut and the sleeve.

Screw it into the centre of the intermediate floor.

The screw, wing nut and sleeve are included

Note:

with the activated charcoal filter.

If the appliance has a spacer rail, remove this. Use a

screwdriver to push the two tabs on the intermediate

floor inwards.

Mask the activated charcoal filter using the enclosed

sealing strips.

Insert the activated charcoal filter at the rear, fold it

up and lock it in the centre using the wing nut. If the

appliance has a spacer rail, reinsert this.

Reinsert the metal grease filter.

Removing the activated charcoal filter

Remove the metal grease filter.

If the appliance has a spacer rail, remove this.

Unlock the activated charcoal filter with the wing nut

in the centre and remove it.

Replace the activated carbon filter and lock it in

place using the wing nut.

If the appliance has a spacer rail, reinsert this.

Reinsert the metal grease filter.