Bosch Series 4 Informações de utilização - Página 11

Imprimir página

Bosch Series 4 Informações de utilização

9.3 Automatic start for the ventilation

system

If you select a power level for a cooking zone, the auto-

matic start switches on.

The ventilation system starts at the corresponding

power level. You can find out how to change this set-

ting in section

→ "Basic settings", Page 12.

9.4 Run-on function for the ventilation

system

The run-on function leaves the ventilation system run-

ning for a few minutes after the hob has been switched

off. This allows you to remove any cooking fumes that

remain. The ventilation system then automatically

switches off.

Activating the fan run-on

As standard, the run-on time is activated with a max-

imum switch-off time.

10 Time-setting options

Your hob has various functions for setting the cooking

time:

¡ Switch-off timer

¡ Timer

10.1 Switch-off timer

Allows you to programme a cooking time for a hotplate

and its automatic switch-off once the set time has

elapsed.

Programming the cooking time

Select the cooking zone and the required power

level.

Touch

⁠ .

a The ⁠ display lights up in the cooking zone.

Use

⁠ or ⁠ to select the cooking time.

a The time begins to count down.

Note: You can automatically set the same cooking time

for all cooking zones. You can find more information

about this under

→ "Basic settings", Page 12.

11 PowerBoost

The PowerBoost function enables you to heat up large

quantities of water faster than when using power

level ⁠ .

This function is available for all cooking zones,

provided the other cooking zone in the same group is

not in use.

You can find out how to change this setting in section

→ "Basic settings", Page 12.

Note: The run-on function only switches on if at least

one cooking zone has been switched on for at least

one minute.

Deactivating the fan run-on

Manually

To deactivate the function, touch ⁠ .

Automatically

The appliance deactivates the run-on function if:

¡ The run-on time has elapsed.

¡ You switch the appliance on again.

Changing or deleting the cooking time

Select the cooking zone.

Touch ⁠ .

To change the cooking time, touch ⁠ or

to ⁠ ⁠ .

10.2 Timer

Enables the activation of a timer of 0–99 minutes. This

function can be used independently of the cooking

zones and other settings. It does not automatically

switch off the hotplates.

Setting the kitchen timer

Select the hotplate and touch

beside

lights up.

Use

⁠ or

to select the required time.

a The time counts down.

Changing or deleting the timer duration

Touch ⁠ repeatedly until the ⁠ display beside

lights up.

To change the cooking time, touch ⁠ or

to ⁠ ⁠ .

Otherwise, ⁠ and ⁠ flash in the display for the selected

cooking zone. ⁠ is then set automatically without activ-

ating the function.

Time-setting options en

or set it

twice.

or set it