Anchor AN-MINIU1 Manual do Proprietário - Página 3

Procurar online ou descarregar pdf Manual do Proprietário para Altifalantes Anchor AN-MINIU1. Anchor AN-MINIU1 4 páginas. Audio sound system
Também para Anchor AN-MINIU1: Ficha de especificações (1 páginas), Manual do Proprietário (7 páginas)

Imprimir página

DIVERSITY WIRELESS BY ANCHOR AUDIO

Anchor Audio UHF wireless is a 16 channel, diversity wireless system that utilizes two independent antennae to

receive signals. The diversity feature means the receiver will process the stronger of the two antenna signals, ef-

fectively minimizing dropouts and interference from other transmitting sources. The antennae are mounted in-

ternally so there are no obstructions or risk of damage.

CHANNEL SELECTION - BUILT-IN RECEIVER

Before you can use your UHF wireless system, you will need to select a wireless frequency, set the built-in receiver,

and microphone transmitter, to that channel.

1. Choose from any of the 16 available wireless channels

2. Set the wireless channel selector knob "CHANNEL" to the channel/frequency you have chosen

RX INDICATOR LIGHTS

AN-MINI

WIRELESS CONTROLS

Model Shown: AN-MINIU1

NOTE: If you experience ongoing interference with your wireless system,

the selected frequency may be incompatible w/ other systems

in the area. Try different channels to find a clear frequency.

UHF WIRELESS ACCESSORIES

WH-6000: 16 channel wireless handheld microphone/transmitter

WB-6000: 16 channel wireless body-pack transmitter for hands free microphone

(microphone not included - see below)

CM-60:

Lightweight, low-profile collar microphone - works w/ the WB-6000 transmitter

EM-60T:

UltraLite "Over-the-Ear" hands free microphone - works w/ the WB-6000 transmitter

LM-60:

Lightweight, clip-on lapel microphone - works w/ the WB-6000 transmitter

HBM-TA4F: Ultra-lightweight headband microphone - works w/ the WB-6000 transmitter

UHF WIRELESS CHANNEL SELECTION

USING AN OUTBOARD CD/TAPE PLAYER

Use the LINE IN input jack to play pre-recorded material through the AN-Mini. The AN-Mini volume knob controls

both the audio source and microphone levels when used simultaneously.

1. Connect a mini-to-mini

patch cable (3.5mm

plugs) to the 'Line' or

'Headphone' output of

SHIELDED

your audio source

PATCH CABLE*

2. Connect the other end

to the LINE IN input

jack on the AN-Mini

control panel

3. Adjust the volume set-

ting of the audio source

to the desired level

AUDIO SOURCE

HEADPHONE / OUTPUT

JACK

RECHARGEABLE BATTERY KIT (OPTIONAL ACCESSORY)

For applications where the AN-Mini PA system is used frequently, the RC-30 rechargeable battery kit is available. This

kit includes 10 rechargeable NiMH batteries and an AC charging adapter. When fully charged the batteries provide

approximately 12 hours of operation.

NOTE: New batteries must be charged for 6 hours prior to first use.

Using the RC-30 Recharge Kit

1. Install the 10 rechargeable NiMH batteries into the AN-Mini (see page 4 - Battery Installation)

2. Insert the charger plug into the Input Jack labeled DC IN on the AN-Mini control panel

3. Plug the AC adapter into a power outlet for 4-6 hours to fully charge

Cycling the batteries

For extended battery life, we recommend you fully charge the batteries once each month during periods of infrequent

use. Always fully recharge batteries before storing.

CAUTION: NEVER recharge other types of batteries. Doing so can result in battery

explosion. Use only rechargeable Nickel-Metal Hydride (NiMH) batteries.

LINE IN

INPUT JACK

*CABLE SOLD SEPARATELY